Cheers guys, appreciate the response.
Already on the way from Australia (Surprisingly fast), will probably have it by Monday. I think it has some sort of "Gauze" which I presume is Steel Wool already in the top right baffle.
I think the top outlet is for the breather filter. Is there an advantage to this?
I had a look today, and to be honest, I'm not sure where I'm going to put this hahaha. Might remove the charcoal canister and put it there. Not too much space in my engine bay currently, but it'll be somewhere around that area. I would love that filler neck Levi has, but that's down the line.
Catch Can Recomendations
Moderator: Moderators
Forum rules
This area is dedicated to technical discussions that don't fit into the more specific areas of the technical section and that may apply to any type of MR2. E.g. tyres, bodywork and rust repairs, lubrication etc. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
This area is dedicated to technical discussions that don't fit into the more specific areas of the technical section and that may apply to any type of MR2. E.g. tyres, bodywork and rust repairs, lubrication etc. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
- GlanzaAtHeart
- Club Member - MR2OCNZ
- Posts: 234
- Joined: Sun Oct 21, 2018 7:21 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Thomas
Re: Catch Can Recomendations
89' SW20 GT w/ Gen 4 3SGTE
13.2 @ 107mph
"man this thing drives like ass" - Sun Tzu, probably
13.2 @ 107mph
"man this thing drives like ass" - Sun Tzu, probably
- GDII
- Forum Moderator - MR2OCNZ
- Posts: 5739
- Joined: Sun Jul 10, 2011 5:13 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Phill
Re: Catch Can Recomendations
Obviously there is the in from the valve cover and out to the intake to produce the vacuum to pull things through however if emissions are ignored then you don't need to plumb it back into the intake and just let the vapour vent through a filter on the outlet as the crank case produces the pressure to force the oil vapour out to the catch can and vent out the filter. Some even just slap a filter onto the valve cover and call it done.
Still be keen to see what the top bolt is for.
Still be keen to see what the top bolt is for.
1990 SW20 MR2 G-Limited (GEN4 3SGTE Installed)
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
- GlanzaAtHeart
- Club Member - MR2OCNZ
- Posts: 234
- Joined: Sun Oct 21, 2018 7:21 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Thomas
Re: Catch Can Recomendations
Been a while since I updated this forum,
but finally fitted it after all this time.
See the pics: I fitted it by attaching an L bracket from Bunnings that I think is used for steel trusses, spray painted black, drilled and bolted to the filler neck bracket.
Fited in quite a good spot IMHO, was going to put it where the charcoal canister is, but not enough space, even if I did remove it.
but finally fitted it after all this time.
See the pics: I fitted it by attaching an L bracket from Bunnings that I think is used for steel trusses, spray painted black, drilled and bolted to the filler neck bracket.
Fited in quite a good spot IMHO, was going to put it where the charcoal canister is, but not enough space, even if I did remove it.
89' SW20 GT w/ Gen 4 3SGTE
13.2 @ 107mph
"man this thing drives like ass" - Sun Tzu, probably
13.2 @ 107mph
"man this thing drives like ass" - Sun Tzu, probably