MR2 Ben Fitment Questions
Moderator: Moderators
Forum rules
Please post in other areas if more suitable (eg technical, for sale etc...) Use of the General section to circumvent correct use of other forum sections may result in posts being deleted or forum permissions being revoked. Thank you.
Please post in other areas if more suitable (eg technical, for sale etc...) Use of the General section to circumvent correct use of other forum sections may result in posts being deleted or forum permissions being revoked. Thank you.
- GlanzaAtHeart
- Club Member - MR2OCNZ
- Posts: 234
- Joined: Sun Oct 21, 2018 7:21 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Thomas
MR2 Ben Fitment Questions
Hey everyone,
I am looking at ordering some body parts from MR2 Ben, and I've heard some good and bad feedback on their fitment.
Does anyone have anything from them and can give some feedback? Don't wanna spend a couple hundred ordering fibreglass parts and waiting weeks to ship, only for them not to fit.
Would appreciate it, thanks everyone.
I am looking at ordering some body parts from MR2 Ben, and I've heard some good and bad feedback on their fitment.
Does anyone have anything from them and can give some feedback? Don't wanna spend a couple hundred ordering fibreglass parts and waiting weeks to ship, only for them not to fit.
Would appreciate it, thanks everyone.
89' SW20 GT w/ Gen 4 3SGTE
13.2 @ 107mph
"man this thing drives like ass" - Sun Tzu, probably
13.2 @ 107mph
"man this thing drives like ass" - Sun Tzu, probably
- GDII
- Forum Moderator - MR2OCNZ
- Posts: 5741
- Joined: Sun Jul 10, 2011 5:13 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Phill
Re: MR2 Ben Fitment Questions
I guess rule of thumb on most aftermarket parts like these is you will expect them not to fit perfectly and have to do work to get them fitting better.
Which parts are you looking at?
Which parts are you looking at?
1990 SW20 MR2 G-Limited (GEN4 3SGTE Installed)
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
- GlanzaAtHeart
- Club Member - MR2OCNZ
- Posts: 234
- Joined: Sun Oct 21, 2018 7:21 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Thomas
Re: MR2 Ben Fitment Questions
I'm looking at getting the TOMS style air scoop, and then possibly some border style side skirts too.
Aftermarket is generally expected not to have perfect fitment, but I expect it to fit about 95%, and have to wiggle that 5% out.
89' SW20 GT w/ Gen 4 3SGTE
13.2 @ 107mph
"man this thing drives like ass" - Sun Tzu, probably
13.2 @ 107mph
"man this thing drives like ass" - Sun Tzu, probably
- Alsw20
- Club Member - MR2OCNZ
- Posts: 1751
- Joined: Mon Jun 28, 2010 1:56 pm
- Stomping Ground: Christchurch
- Prime Mover: SW20
- First name: Al
Re: MR2 Ben Fitment Questions
Buying the body kit is the cheap part.
- GDII
- Forum Moderator - MR2OCNZ
- Posts: 5741
- Joined: Sun Jul 10, 2011 5:13 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Phill
Re: MR2 Ben Fitment Questions
Anything that says Style in the name is always going to be a problem. But as you expect things to not be perfect you know what you are getting into. Like Al says, buying the part is the cheap bit. Getting it fitted will be an expensive exercise if you farm that out to a body shop.
1990 SW20 MR2 G-Limited (GEN4 3SGTE Installed)
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
-
- Club Member - MR2OCNZ
- Posts: 524
- Joined: Wed May 04, 2016 8:47 pm
- Stomping Ground: Manawatu
- Prime Mover: SW20
- First name: Mo
Re: MR2 Ben Fitment Questions
MR2 Ben as a supplier is ver good. I’ve dealt with them before and have been really pleased all round
2017 Toyota Aqua G's
Daily Drive: 2005 Honda CR-V Sport (Auto) - SOLD
When the Wife Allows: 2020 TRD RAV4 Limited Hybrid
If the Weather is Nice: 2000 GDBSTiV7 Subaru
Looking Forward To: Supercharged MR2
Daily Drive: 2005 Honda CR-V Sport (Auto) - SOLD
When the Wife Allows: 2020 TRD RAV4 Limited Hybrid
If the Weather is Nice: 2000 GDBSTiV7 Subaru
Looking Forward To: Supercharged MR2
- Crawls
- Executive Officer - MR2OCNZ
- Posts: 330
- Joined: Wed Jan 11, 2017 10:23 pm
- Stomping Ground: Hawkes Bay
- Prime Mover: SW20
- First name: Keith
Re: MR2 Ben Fitment Questions
I have just ordered some front indicator/park light lenses from them. What is the turn around time like??
Keith "Crawls" Crawley
Membership Officer & Hawkes Bay Area Coordinator
90 SW20 n/a (Repairing)
18 Fortuner (Current)
92 SW20 (Current)
https://www.instagram.com/keith_crawley
Membership Officer & Hawkes Bay Area Coordinator
90 SW20 n/a (Repairing)
18 Fortuner (Current)
92 SW20 (Current)
https://www.instagram.com/keith_crawley
-
- Club Member - MR2OCNZ
- Posts: 524
- Joined: Wed May 04, 2016 8:47 pm
- Stomping Ground: Manawatu
- Prime Mover: SW20
- First name: Mo
Re: MR2 Ben Fitment Questions
When everything was running, i.e. couriers etc. I managed to get everything here within 2 weeks. I bought both side TOMS air scoop for my project as well from them. They are built actually pretty solid and fitment was not an issue (mind you I have not finished installing them, just test fitted and they are good). I am in the process of modifying them so that they do not disturb the airflow in the engine bay.
Good luck with the shipment etc., I think that is where things could be a bit dicey under the current lockdown scenario
Stay safe
Good luck with the shipment etc., I think that is where things could be a bit dicey under the current lockdown scenario
Stay safe
2017 Toyota Aqua G's
Daily Drive: 2005 Honda CR-V Sport (Auto) - SOLD
When the Wife Allows: 2020 TRD RAV4 Limited Hybrid
If the Weather is Nice: 2000 GDBSTiV7 Subaru
Looking Forward To: Supercharged MR2
Daily Drive: 2005 Honda CR-V Sport (Auto) - SOLD
When the Wife Allows: 2020 TRD RAV4 Limited Hybrid
If the Weather is Nice: 2000 GDBSTiV7 Subaru
Looking Forward To: Supercharged MR2
- Crawls
- Executive Officer - MR2OCNZ
- Posts: 330
- Joined: Wed Jan 11, 2017 10:23 pm
- Stomping Ground: Hawkes Bay
- Prime Mover: SW20
- First name: Keith
Re: MR2 Ben Fitment Questions
Thanks for the info. I am not worried if it takes 3-4 weeks. Gives me more time for more repairs.
Keith "Crawls" Crawley
Membership Officer & Hawkes Bay Area Coordinator
90 SW20 n/a (Repairing)
18 Fortuner (Current)
92 SW20 (Current)
https://www.instagram.com/keith_crawley
Membership Officer & Hawkes Bay Area Coordinator
90 SW20 n/a (Repairing)
18 Fortuner (Current)
92 SW20 (Current)
https://www.instagram.com/keith_crawley
- GlanzaAtHeart
- Club Member - MR2OCNZ
- Posts: 234
- Joined: Sun Oct 21, 2018 7:21 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Thomas
Re: MR2 Ben Fitment Questions
Thanks for the help! I'll probably go ahead with getting that TOMS scoop. Quick question - They want 120 quid just to ship it here. Did you pay that? Or go another route?lasersooby wrote: ↑Sat Apr 11, 2020 7:08 pmWhen everything was running, i.e. couriers etc. I managed to get everything here within 2 weeks. I bought both side TOMS air scoop for my project as well from them. They are built actually pretty solid and fitment was not an issue (mind you I have not finished installing them, just test fitted and they are good). I am in the process of modifying them so that they do not disturb the airflow in the engine bay.
Good luck with the shipment etc., I think that is where things could be a bit dicey under the current lockdown scenario
Stay safe
89' SW20 GT w/ Gen 4 3SGTE
13.2 @ 107mph
"man this thing drives like ass" - Sun Tzu, probably
13.2 @ 107mph
"man this thing drives like ass" - Sun Tzu, probably
-
- Club Member - MR2OCNZ
- Posts: 524
- Joined: Wed May 04, 2016 8:47 pm
- Stomping Ground: Manawatu
- Prime Mover: SW20
- First name: Mo
Re: MR2 Ben Fitment Questions
Hi mate, I bought a few other bits for the MR2 in London. I had them ship it to my contact in London who then consolidated everything for me. I got Door to Door Freight Services. Worked out cheaper this way as it was all boxed up as one shipment
2017 Toyota Aqua G's
Daily Drive: 2005 Honda CR-V Sport (Auto) - SOLD
When the Wife Allows: 2020 TRD RAV4 Limited Hybrid
If the Weather is Nice: 2000 GDBSTiV7 Subaru
Looking Forward To: Supercharged MR2
Daily Drive: 2005 Honda CR-V Sport (Auto) - SOLD
When the Wife Allows: 2020 TRD RAV4 Limited Hybrid
If the Weather is Nice: 2000 GDBSTiV7 Subaru
Looking Forward To: Supercharged MR2
- Crawls
- Executive Officer - MR2OCNZ
- Posts: 330
- Joined: Wed Jan 11, 2017 10:23 pm
- Stomping Ground: Hawkes Bay
- Prime Mover: SW20
- First name: Keith
Re: MR2 Ben Fitment Questions
I finally installed the park lights from mr2ben.
Perfect fit.
Perfect fit.
Keith "Crawls" Crawley
Membership Officer & Hawkes Bay Area Coordinator
90 SW20 n/a (Repairing)
18 Fortuner (Current)
92 SW20 (Current)
https://www.instagram.com/keith_crawley
Membership Officer & Hawkes Bay Area Coordinator
90 SW20 n/a (Repairing)
18 Fortuner (Current)
92 SW20 (Current)
https://www.instagram.com/keith_crawley