Hey all
I have a fusion bass controller which has an 6P6C cord, and then I have a fusion amp fp-402 which has a connector for a bass controller, except on the amp its for a 4P4C. What can I do? Not only are their two extra conductors over the 4 piece, it doesn't fit. So what are my options? Or if I was unable to find a converter and rewired it myself, what 2 conductor colours would I leave out, and what positions should I place each colour? Cheers
Bass controller into amp
Moderator: Moderators
Forum rules
This area is dedicated to technical discussions concerning in-car electronics. Stereos, alarms, GPS etc. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
This area is dedicated to technical discussions concerning in-car electronics. Stereos, alarms, GPS etc. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
- ClanFever
- Executive Officer - MR2OCNZ
- Posts: 2197
- Joined: Tue Sep 11, 2012 11:25 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Olaf
- Contact:
Bass controller into amp
Ex-President & Wellington Area Coordinator & Lower North MR2 Leader
Current: 1992 Toyota MR2 G-Limited with Gen 4 3S-GTE + CT20B (APEXED), 2005 Toyota IST, 2008 Toyota Vanguard - 2GR!
Past: 1990 Toyota MR2 G-Limited, "Semi Parts Car" 1991 Toyota MR2 G-Limited, '91 G-Limited, '89 G-Limited, '91 NZ New MR2, '91 G-Limited, '91 GT (Parts Car), '99 Altezza 3SGE, '98 Altezza 1GFE, '88 Corolla, '96 Curren, '94 Ceres Corolla, '94 Levin, '90 Hiace Super Custom 4x4, '91 Mirage, '93 MX-6 J-Spec, '91 Familia, '91 Galant, '90 Navara, '96 Commodore, '94 Pajero, '89 Lancer, '93 Pajero, '92 Pajero, '89 Mirage, '92 Terrano, '87 Familia, '03 Colt, '91 Pajero, '91 Pajero, '97 Carib, '96 Carina, '02 Turbo Forester
Current: 1992 Toyota MR2 G-Limited with Gen 4 3S-GTE + CT20B (APEXED), 2005 Toyota IST, 2008 Toyota Vanguard - 2GR!
Past: 1990 Toyota MR2 G-Limited, "Semi Parts Car" 1991 Toyota MR2 G-Limited, '91 G-Limited, '89 G-Limited, '91 NZ New MR2, '91 G-Limited, '91 GT (Parts Car), '99 Altezza 3SGE, '98 Altezza 1GFE, '88 Corolla, '96 Curren, '94 Ceres Corolla, '94 Levin, '90 Hiace Super Custom 4x4, '91 Mirage, '93 MX-6 J-Spec, '91 Familia, '91 Galant, '90 Navara, '96 Commodore, '94 Pajero, '89 Lancer, '93 Pajero, '92 Pajero, '89 Mirage, '92 Terrano, '87 Familia, '03 Colt, '91 Pajero, '91 Pajero, '97 Carib, '96 Carina, '02 Turbo Forester
- ClanFever
- Executive Officer - MR2OCNZ
- Posts: 2197
- Joined: Tue Sep 11, 2012 11:25 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Olaf
- Contact:
Re: Bass controller into amp
"Hi Olaf,
Sorry you have the incorrect controller. The FP-402 amp is very old and parts are no longer available for them. I would not try to rewire unless you can replicate the connections at the amp plug end. They are wired differently as in positions which are not related to the colour of the wire. The amp is 6-8 years old and I do not know what controller you have.
Sorry I could not be more help."
That's what fusion said. I have found a 4p4c connector from an old phone, is it going to be worth the while rewiring it? Considering I then have to leave 2 conductors out, and by the looks of that, I can't even guess on colours.
Sorry you have the incorrect controller. The FP-402 amp is very old and parts are no longer available for them. I would not try to rewire unless you can replicate the connections at the amp plug end. They are wired differently as in positions which are not related to the colour of the wire. The amp is 6-8 years old and I do not know what controller you have.
Sorry I could not be more help."
That's what fusion said. I have found a 4p4c connector from an old phone, is it going to be worth the while rewiring it? Considering I then have to leave 2 conductors out, and by the looks of that, I can't even guess on colours.
Ex-President & Wellington Area Coordinator & Lower North MR2 Leader
Current: 1992 Toyota MR2 G-Limited with Gen 4 3S-GTE + CT20B (APEXED), 2005 Toyota IST, 2008 Toyota Vanguard - 2GR!
Past: 1990 Toyota MR2 G-Limited, "Semi Parts Car" 1991 Toyota MR2 G-Limited, '91 G-Limited, '89 G-Limited, '91 NZ New MR2, '91 G-Limited, '91 GT (Parts Car), '99 Altezza 3SGE, '98 Altezza 1GFE, '88 Corolla, '96 Curren, '94 Ceres Corolla, '94 Levin, '90 Hiace Super Custom 4x4, '91 Mirage, '93 MX-6 J-Spec, '91 Familia, '91 Galant, '90 Navara, '96 Commodore, '94 Pajero, '89 Lancer, '93 Pajero, '92 Pajero, '89 Mirage, '92 Terrano, '87 Familia, '03 Colt, '91 Pajero, '91 Pajero, '97 Carib, '96 Carina, '02 Turbo Forester
Current: 1992 Toyota MR2 G-Limited with Gen 4 3S-GTE + CT20B (APEXED), 2005 Toyota IST, 2008 Toyota Vanguard - 2GR!
Past: 1990 Toyota MR2 G-Limited, "Semi Parts Car" 1991 Toyota MR2 G-Limited, '91 G-Limited, '89 G-Limited, '91 NZ New MR2, '91 G-Limited, '91 GT (Parts Car), '99 Altezza 3SGE, '98 Altezza 1GFE, '88 Corolla, '96 Curren, '94 Ceres Corolla, '94 Levin, '90 Hiace Super Custom 4x4, '91 Mirage, '93 MX-6 J-Spec, '91 Familia, '91 Galant, '90 Navara, '96 Commodore, '94 Pajero, '89 Lancer, '93 Pajero, '92 Pajero, '89 Mirage, '92 Terrano, '87 Familia, '03 Colt, '91 Pajero, '91 Pajero, '97 Carib, '96 Carina, '02 Turbo Forester