Hi all,
Any out there interested in the only engine mount needed for an AW11 to mount a 2zzge?
I've worked with a local engineering company over a few different prototypes to get a good working option for this.
Bridges between the 2zz engine mount and AW11 drivers side standard mount. Has passed NZ LVV certification on 2 separate inspections. Pins are threaded and welded for strength, and is zinc plated for corrosion resistance.
No welding needed, just press out the two bolts from the factory mount and bolt this in to make the mounting part of your swap 'plug and play'! Easily reversible if you wanted - but if you've a 2zz why would you want to
Other 3 engine mounts are on the gearbox, and being c-series will bolt right up with no modification needed.
Any questions around this sing out.
Flick me a PM for more details if you're interested.
AW11 'bridge' engine mount for 2zzge
Moderator: Moderators
Forum rules
This area is dedicated to technical discussions concerning AW10's and AW11's. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
This area is dedicated to technical discussions concerning AW10's and AW11's. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
- flying_wedge
- Club Member - MR2OCNZ
- Posts: 1696
- Joined: Sat Aug 06, 2005 5:07 pm
- Stomping Ground: Christchurch
- Prime Mover: AW11
- First name: Mark
-
- Guest of the Club.
- Posts: 1
- Joined: Mon Jul 27, 2020 5:24 pm
- Stomping Ground: Outside of New Zealand
- Prime Mover: AW11
- First name: David
Re: AW11 'bridge' engine mount for 2zzge
I’m doing this swap into my ‘87 MR2! I am definitely interested. Are these still available?
- flying_wedge
- Club Member - MR2OCNZ
- Posts: 1696
- Joined: Sat Aug 06, 2005 5:07 pm
- Stomping Ground: Christchurch
- Prime Mover: AW11
- First name: Mark
Re: AW11 'bridge' engine mount for 2zzge
Sure are - I flicked you a PM. Thanks.KaptainJackson wrote: ↑Sun Aug 09, 2020 6:45 pmI’m doing this swap into my ‘87 MR2! I am definitely interested. Are these still available?