Radiator Air Bleed Valve

An area for technical topics concerning AW10's and AW11's

Moderator: Moderators

Forum rules
This area is dedicated to technical discussions concerning AW10's and AW11's. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
User avatar
Aza
Club Member - MR2OCNZ
Posts: 37
Joined: Tue Mar 22, 2016 9:10 pm
Stomping Ground: Nelson
Prime Mover: AW11
First name: Aaron

Radiator Air Bleed Valve

Post by Aza »

All comments welcome on this topic, good or bad; mainly because I don't want to screw up a fresh bluetop!:
The replacement radiator I purchased just came with a black, threaded bung for the air bleed, as you'll see in the photos. I'm certain I have seen a replacement in the U.S for the bleed valve but the shipping costs killed it.

If this has been done before, or betterer, let me know..

- I cut the old bleed valve out of the shagged radiator and tidied up around the hex base
- The barrel of the valve that was inside the radiator was larger than the thread of the new bung, so I machined down the brass and cut the same thread as the bung on it.
- Screwed it in with some Loctite 567. I decided not to use the O ring as there wasn't enough lip under the hex and it rolled out when I tightened it.
Attachments
IMG_0665.jpg
IMG_0666.jpg
IMG_0668.jpg
IMG_0669.jpg

User avatar
*84vvt
Life Member - MR2OCNZ
Posts: 2557
Joined: Sun Jun 06, 2004 11:44 am
Stomping Ground: Wellington
Prime Mover: AW11
First name: Colin

Re: Radiator Air Bleed Valve

Post by *84vvt »

Nicely done I would of use thread tape over just the sealant but looks good 8)
Boosted cars are like hot women.
A little edgy, every guy wants one,
some guys can't handle them,
and if you throw a little alcohol in them they'll rock your world.

Image

User avatar
Aza
Club Member - MR2OCNZ
Posts: 37
Joined: Tue Mar 22, 2016 9:10 pm
Stomping Ground: Nelson
Prime Mover: AW11
First name: Aaron

Re: Radiator Air Bleed Valve

Post by Aza »

This seems to be doing the trick so far. :P Maybe a small win for Aaron..

Post Reply