Knock Sensor wanted '88 4AGZE AW11
Moderator: Moderators
Forum rules
This area is dedicated to technical discussions concerning AW10's and AW11's. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
This area is dedicated to technical discussions concerning AW10's and AW11's. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
-
- Club Member - MR2OCNZ
- Posts: 8
- Joined: Sun Nov 24, 2019 7:40 pm
- Stomping Ground: Christchurch
- Prime Mover: AW11
- First name: David
Knock Sensor wanted '88 4AGZE AW11
I hope someone can help.
My knock sensor has failed and it is proving difficult to locate a replacement.
Part number 89615-17010
is anyone able to help? Thanks. David
My knock sensor has failed and it is proving difficult to locate a replacement.
Part number 89615-17010
is anyone able to help? Thanks. David
- ClanFever
- Executive Officer - MR2OCNZ
- Posts: 2197
- Joined: Tue Sep 11, 2012 11:25 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Olaf
- Contact:
Re: Knock Sensor wanted '88 4AGZE AW11
For the 3S you can use a knock sensor from many other vehicles, such as the 5sfe from a Camry. I am wondering if you could do the same, as long as it's the same thread and plug, it is listening for the same noise. Any 4a, 5a or 7a engine would most likely work, at least I would have thought. Would be good if someone can confirm
Ex-President & Wellington Area Coordinator & Lower North MR2 Leader
Current: 1992 Toyota MR2 G-Limited with Gen 4 3S-GTE + CT20B (APEXED), 2005 Toyota IST, 2008 Toyota Vanguard - 2GR!
Past: 1990 Toyota MR2 G-Limited, "Semi Parts Car" 1991 Toyota MR2 G-Limited, '91 G-Limited, '89 G-Limited, '91 NZ New MR2, '91 G-Limited, '91 GT (Parts Car), '99 Altezza 3SGE, '98 Altezza 1GFE, '88 Corolla, '96 Curren, '94 Ceres Corolla, '94 Levin, '90 Hiace Super Custom 4x4, '91 Mirage, '93 MX-6 J-Spec, '91 Familia, '91 Galant, '90 Navara, '96 Commodore, '94 Pajero, '89 Lancer, '93 Pajero, '92 Pajero, '89 Mirage, '92 Terrano, '87 Familia, '03 Colt, '91 Pajero, '91 Pajero, '97 Carib, '96 Carina, '02 Turbo Forester
Current: 1992 Toyota MR2 G-Limited with Gen 4 3S-GTE + CT20B (APEXED), 2005 Toyota IST, 2008 Toyota Vanguard - 2GR!
Past: 1990 Toyota MR2 G-Limited, "Semi Parts Car" 1991 Toyota MR2 G-Limited, '91 G-Limited, '89 G-Limited, '91 NZ New MR2, '91 G-Limited, '91 GT (Parts Car), '99 Altezza 3SGE, '98 Altezza 1GFE, '88 Corolla, '96 Curren, '94 Ceres Corolla, '94 Levin, '90 Hiace Super Custom 4x4, '91 Mirage, '93 MX-6 J-Spec, '91 Familia, '91 Galant, '90 Navara, '96 Commodore, '94 Pajero, '89 Lancer, '93 Pajero, '92 Pajero, '89 Mirage, '92 Terrano, '87 Familia, '03 Colt, '91 Pajero, '91 Pajero, '97 Carib, '96 Carina, '02 Turbo Forester
- GDII
- Forum Moderator - MR2OCNZ
- Posts: 5739
- Joined: Sun Jul 10, 2011 5:13 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Phill
Re: Knock Sensor wanted '88 4AGZE AW11
The part number is specific to 4AGZE so I'd not risk it without prior knowledge of someone confirming another type works.ClanFever wrote: ↑Tue Jun 02, 2020 10:50 amFor the 3S you can use a knock sensor from many other vehicles, such as the 5sfe from a Camry. I am wondering if you could do the same, as long as it's the same thread and plug, it is listening for the same noise. Any 4a, 5a or 7a engine would most likely work, at least I would have thought. Would be good if someone can confirm
1990 SW20 MR2 G-Limited (GEN4 3SGTE Installed)
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
- ClanFever
- Executive Officer - MR2OCNZ
- Posts: 2197
- Joined: Tue Sep 11, 2012 11:25 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Olaf
- Contact:
Re: Knock Sensor wanted '88 4AGZE AW11
Is the part number on the 3sgte more generic?GDII wrote: ↑Tue Jun 02, 2020 11:15 amThe part number is specific to 4AGZE so I'd not risk it without prior knowledge of someone confirming another type works.ClanFever wrote: ↑Tue Jun 02, 2020 10:50 amFor the 3S you can use a knock sensor from many other vehicles, such as the 5sfe from a Camry. I am wondering if you could do the same, as long as it's the same thread and plug, it is listening for the same noise. Any 4a, 5a or 7a engine would most likely work, at least I would have thought. Would be good if someone can confirm
Ex-President & Wellington Area Coordinator & Lower North MR2 Leader
Current: 1992 Toyota MR2 G-Limited with Gen 4 3S-GTE + CT20B (APEXED), 2005 Toyota IST, 2008 Toyota Vanguard - 2GR!
Past: 1990 Toyota MR2 G-Limited, "Semi Parts Car" 1991 Toyota MR2 G-Limited, '91 G-Limited, '89 G-Limited, '91 NZ New MR2, '91 G-Limited, '91 GT (Parts Car), '99 Altezza 3SGE, '98 Altezza 1GFE, '88 Corolla, '96 Curren, '94 Ceres Corolla, '94 Levin, '90 Hiace Super Custom 4x4, '91 Mirage, '93 MX-6 J-Spec, '91 Familia, '91 Galant, '90 Navara, '96 Commodore, '94 Pajero, '89 Lancer, '93 Pajero, '92 Pajero, '89 Mirage, '92 Terrano, '87 Familia, '03 Colt, '91 Pajero, '91 Pajero, '97 Carib, '96 Carina, '02 Turbo Forester
Current: 1992 Toyota MR2 G-Limited with Gen 4 3S-GTE + CT20B (APEXED), 2005 Toyota IST, 2008 Toyota Vanguard - 2GR!
Past: 1990 Toyota MR2 G-Limited, "Semi Parts Car" 1991 Toyota MR2 G-Limited, '91 G-Limited, '89 G-Limited, '91 NZ New MR2, '91 G-Limited, '91 GT (Parts Car), '99 Altezza 3SGE, '98 Altezza 1GFE, '88 Corolla, '96 Curren, '94 Ceres Corolla, '94 Levin, '90 Hiace Super Custom 4x4, '91 Mirage, '93 MX-6 J-Spec, '91 Familia, '91 Galant, '90 Navara, '96 Commodore, '94 Pajero, '89 Lancer, '93 Pajero, '92 Pajero, '89 Mirage, '92 Terrano, '87 Familia, '03 Colt, '91 Pajero, '91 Pajero, '97 Carib, '96 Carina, '02 Turbo Forester
-
- Club Member - MR2OCNZ
- Posts: 8
- Joined: Sun Nov 24, 2019 7:40 pm
- Stomping Ground: Christchurch
- Prime Mover: AW11
- First name: David
Re: Knock Sensor wanted '88 4AGZE AW11
The part number is 89615-17010.
Thanks for your help.
Thanks for your help.
- GDII
- Forum Moderator - MR2OCNZ
- Posts: 5739
- Joined: Sun Jul 10, 2011 5:13 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Phill
Re: Knock Sensor wanted '88 4AGZE AW11
Yes they are a lot more generic but still there were at least 3 different ones on the MR2 3SGTE for Japan. It always pays to check as each engine type and configuration has a knock frequency that differs. One engines knock frequency might be another engines background noise. Although it seems a 1UZ V8 sensor is the same as 3S sensor for some versions of the MR2. Do the research before potentially damaging your engine.ClanFever wrote: ↑Tue Jun 02, 2020 11:24 amIs the part number on the 3sgte more generic?GDII wrote: ↑Tue Jun 02, 2020 11:15 amThe part number is specific to 4AGZE so I'd not risk it without prior knowledge of someone confirming another type works.ClanFever wrote: ↑Tue Jun 02, 2020 10:50 amFor the 3S you can use a knock sensor from many other vehicles, such as the 5sfe from a Camry. I am wondering if you could do the same, as long as it's the same thread and plug, it is listening for the same noise. Any 4a, 5a or 7a engine would most likely work, at least I would have thought. Would be good if someone can confirm
1990 SW20 MR2 G-Limited (GEN4 3SGTE Installed)
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
- ClanFever
- Executive Officer - MR2OCNZ
- Posts: 2197
- Joined: Tue Sep 11, 2012 11:25 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Olaf
- Contact:
Re: Knock Sensor wanted '88 4AGZE AW11
We did our research and still damaged my engineGDII wrote: ↑Tue Jun 02, 2020 12:47 pmYes they are a lot more generic but still there were at least 3 different ones on the MR2 3SGTE for Japan. It always pays to check as each engine type and configuration has a knock frequency that differs. One engines knock frequency might be another engines background noise. Although it seems a 1UZ V8 sensor is the same as 3S sensor for some versions of the MR2. Do the research before potentially damaging your engine.ClanFever wrote: ↑Tue Jun 02, 2020 11:24 amIs the part number on the 3sgte more generic?GDII wrote: ↑Tue Jun 02, 2020 11:15 amThe part number is specific to 4AGZE so I'd not risk it without prior knowledge of someone confirming another type works.ClanFever wrote: ↑Tue Jun 02, 2020 10:50 amFor the 3S you can use a knock sensor from many other vehicles, such as the 5sfe from a Camry. I am wondering if you could do the same, as long as it's the same thread and plug, it is listening for the same noise. Any 4a, 5a or 7a engine would most likely work, at least I would have thought. Would be good if someone can confirm
Ex-President & Wellington Area Coordinator & Lower North MR2 Leader
Current: 1992 Toyota MR2 G-Limited with Gen 4 3S-GTE + CT20B (APEXED), 2005 Toyota IST, 2008 Toyota Vanguard - 2GR!
Past: 1990 Toyota MR2 G-Limited, "Semi Parts Car" 1991 Toyota MR2 G-Limited, '91 G-Limited, '89 G-Limited, '91 NZ New MR2, '91 G-Limited, '91 GT (Parts Car), '99 Altezza 3SGE, '98 Altezza 1GFE, '88 Corolla, '96 Curren, '94 Ceres Corolla, '94 Levin, '90 Hiace Super Custom 4x4, '91 Mirage, '93 MX-6 J-Spec, '91 Familia, '91 Galant, '90 Navara, '96 Commodore, '94 Pajero, '89 Lancer, '93 Pajero, '92 Pajero, '89 Mirage, '92 Terrano, '87 Familia, '03 Colt, '91 Pajero, '91 Pajero, '97 Carib, '96 Carina, '02 Turbo Forester
Current: 1992 Toyota MR2 G-Limited with Gen 4 3S-GTE + CT20B (APEXED), 2005 Toyota IST, 2008 Toyota Vanguard - 2GR!
Past: 1990 Toyota MR2 G-Limited, "Semi Parts Car" 1991 Toyota MR2 G-Limited, '91 G-Limited, '89 G-Limited, '91 NZ New MR2, '91 G-Limited, '91 GT (Parts Car), '99 Altezza 3SGE, '98 Altezza 1GFE, '88 Corolla, '96 Curren, '94 Ceres Corolla, '94 Levin, '90 Hiace Super Custom 4x4, '91 Mirage, '93 MX-6 J-Spec, '91 Familia, '91 Galant, '90 Navara, '96 Commodore, '94 Pajero, '89 Lancer, '93 Pajero, '92 Pajero, '89 Mirage, '92 Terrano, '87 Familia, '03 Colt, '91 Pajero, '91 Pajero, '97 Carib, '96 Carina, '02 Turbo Forester
- GDII
- Forum Moderator - MR2OCNZ
- Posts: 5739
- Joined: Sun Jul 10, 2011 5:13 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Phill
Re: Knock Sensor wanted '88 4AGZE AW11
Not from knock, from the common GEN2 block crack on the water pump side of cylinder 1.
Much off topic, where are the Mods?!
1990 SW20 MR2 G-Limited (GEN4 3SGTE Installed)
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
- ClanFever
- Executive Officer - MR2OCNZ
- Posts: 2197
- Joined: Tue Sep 11, 2012 11:25 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Olaf
- Contact:
Re: Knock Sensor wanted '88 4AGZE AW11
Knock knock? Oh wait we're trying to avoid that...
A more serious answer might be, contact Car Parts Canterbury. They've usually got tons of MR2s (and Levin's) so might be your best bet if it is an urgent issue. https://www.carpartscanterbury.co.nz/ - Also I take it you've contacted Toyota and made sure they don't have any?
Ex-President & Wellington Area Coordinator & Lower North MR2 Leader
Current: 1992 Toyota MR2 G-Limited with Gen 4 3S-GTE + CT20B (APEXED), 2005 Toyota IST, 2008 Toyota Vanguard - 2GR!
Past: 1990 Toyota MR2 G-Limited, "Semi Parts Car" 1991 Toyota MR2 G-Limited, '91 G-Limited, '89 G-Limited, '91 NZ New MR2, '91 G-Limited, '91 GT (Parts Car), '99 Altezza 3SGE, '98 Altezza 1GFE, '88 Corolla, '96 Curren, '94 Ceres Corolla, '94 Levin, '90 Hiace Super Custom 4x4, '91 Mirage, '93 MX-6 J-Spec, '91 Familia, '91 Galant, '90 Navara, '96 Commodore, '94 Pajero, '89 Lancer, '93 Pajero, '92 Pajero, '89 Mirage, '92 Terrano, '87 Familia, '03 Colt, '91 Pajero, '91 Pajero, '97 Carib, '96 Carina, '02 Turbo Forester
Current: 1992 Toyota MR2 G-Limited with Gen 4 3S-GTE + CT20B (APEXED), 2005 Toyota IST, 2008 Toyota Vanguard - 2GR!
Past: 1990 Toyota MR2 G-Limited, "Semi Parts Car" 1991 Toyota MR2 G-Limited, '91 G-Limited, '89 G-Limited, '91 NZ New MR2, '91 G-Limited, '91 GT (Parts Car), '99 Altezza 3SGE, '98 Altezza 1GFE, '88 Corolla, '96 Curren, '94 Ceres Corolla, '94 Levin, '90 Hiace Super Custom 4x4, '91 Mirage, '93 MX-6 J-Spec, '91 Familia, '91 Galant, '90 Navara, '96 Commodore, '94 Pajero, '89 Lancer, '93 Pajero, '92 Pajero, '89 Mirage, '92 Terrano, '87 Familia, '03 Colt, '91 Pajero, '91 Pajero, '97 Carib, '96 Carina, '02 Turbo Forester
-
- Club Member - MR2OCNZ
- Posts: 8
- Joined: Sun Nov 24, 2019 7:40 pm
- Stomping Ground: Christchurch
- Prime Mover: AW11
- First name: David
Re: Knock Sensor wanted '88 4AGZE AW11
Yeah Toyota said they had one which turned out to be an empty box - doh
Thanks for the help guys.
Thanks for the help guys.
-
- Guest of the Club.
- Posts: 4
- Joined: Mon Jul 13, 2020 8:07 pm
- Stomping Ground: Auckland
- Prime Mover: AW11
- First name: Sam
Re: Knock Sensor wanted '88 4AGZE AW11
Glad this has been addressed