Photos of fuse box plugs request 1992-1993 G-Limited

An area for topics concerning SW20's

Moderator: Moderators

Forum rules
This area is dedicated to technical discussions concerning SW20's. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
Post Reply
User avatar
GDII
Club Member - MR2OCNZ
Posts: 4166
Joined: Sun Jul 10, 2011 5:13 pm
Stomping Ground: Wellington
Prime Mover: SW20
First name: Phill

Photos of fuse box plugs request 1992-1993 G-Limited

Post by GDII »

I'm trying to find some information from a 92-93 JDM G-Limited.

Can I please get 2 photos of the plug with wire colours as per the photos below. And then advise me which 2 wires are for the air box Air temp sensor.

This plug is called EA3 in USDM wiring diagrams or EG2 in the JDM diagrams. This is from my 89-91 JDM G-Limited as an example.
IMG_20200306_222953.jpg
IMG_20200306_222959.jpg
I suspect that the 2 wires I am looking for are pin 14 and 15. 14 being Brown and 15 being Yellow which are located in the middle of image 2 between the Black w/White and Red w/Black wires. If this plug is unplugged and a multimeter is set to beep/continuity mode then the corresponding pins in the fuse box and the temp sensor plug itself from the air box are tested it will show which pins are connected to the sensor. I don't currently have access to a 92-93 G-Limited so require some help please.
1996 AE101 Corolla Sprint NZ New Daily
1990 SW20 MR2 G-Limited
2005 DY3 Demio
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/

User avatar
GDII
Club Member - MR2OCNZ
Posts: 4166
Joined: Sun Jul 10, 2011 5:13 pm
Stomping Ground: Wellington
Prime Mover: SW20
First name: Phill

Re: Photos of fuse box plugs request 1992-1993 G-Limited

Post by GDII »

Ok never mind. I got Olaf to check his car and I can confirm that it is pin 14 and 15 as per the photos of the 1990 G-Limited if anyone for some reason cares. :roll: :lol:
1996 AE101 Corolla Sprint NZ New Daily
1990 SW20 MR2 G-Limited
2005 DY3 Demio
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/

mknz
Site Admin - MR2OCNZ
Posts: 1075
Joined: Thu Apr 03, 2014 1:17 am
Stomping Ground: Auckland
Prime Mover: More than one MR2
First name: Michael
Contact:

Re: Photos of fuse box plugs request 1992-1993 G-Limited

Post by mknz »

GDII wrote:
Thu Apr 02, 2020 5:20 pm
Ok never mind. I got Olaf to check his car and I can confirm that it is pin 14 and 15 as per the photos of the 1990 G-Limited if anyone for some reason cares. :roll: :lol:
Someone will one day and you'll never know, it might even be you googling again to confirm

User avatar
GDII
Club Member - MR2OCNZ
Posts: 4166
Joined: Sun Jul 10, 2011 5:13 pm
Stomping Ground: Wellington
Prime Mover: SW20
First name: Phill

Re: Photos of fuse box plugs request 1992-1993 G-Limited

Post by GDII »

mknz wrote:
Thu Apr 02, 2020 5:23 pm
GDII wrote:
Thu Apr 02, 2020 5:20 pm
Ok never mind. I got Olaf to check his car and I can confirm that it is pin 14 and 15 as per the photos of the 1990 G-Limited if anyone for some reason cares. :roll: :lol:
Someone will one day and you'll never know, it might even be you googling again to confirm
If I lose my data on this. I will look to buy a 92-93 JDM wiring diagram for the MR2 and probably the 94-99 3SGTE, 94-97 3SGE and the 98-99 3SGE too. Although I could create my own for the GEN3 3SGTE.

You might need it for your car. It's probably not hooked up on your car anyway.
Last edited by GDII on Thu Apr 02, 2020 9:08 pm, edited 1 time in total.
1996 AE101 Corolla Sprint NZ New Daily
1990 SW20 MR2 G-Limited
2005 DY3 Demio
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/

mknz
Site Admin - MR2OCNZ
Posts: 1075
Joined: Thu Apr 03, 2014 1:17 am
Stomping Ground: Auckland
Prime Mover: More than one MR2
First name: Michael
Contact:

Re: Photos of fuse box plugs request 1992-1993 G-Limited

Post by mknz »

I don't have an airbox ATM. It's a filter straight on turbo inlet. I have a sensor and plug I should put in the right place once I have an intake pipe

User avatar
GDII
Club Member - MR2OCNZ
Posts: 4166
Joined: Sun Jul 10, 2011 5:13 pm
Stomping Ground: Wellington
Prime Mover: SW20
First name: Phill

Re: Photos of fuse box plugs request 1992-1993 G-Limited

Post by GDII »

mknz wrote:
Thu Apr 02, 2020 8:21 pm
I don't have an airbox ATM. It's a filter straight on turbo inlet. I have a sensor and plug I should put in the right place once I have an intake pipe
It seems many do not use this sensor. I don't know what the ECU uses it for as the intake manifold has one but if Toyota put it in then I want to use it by drilling a hole in the intake pipe and fitting the rubber grommet and sensor.
1996 AE101 Corolla Sprint NZ New Daily
1990 SW20 MR2 G-Limited
2005 DY3 Demio
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/

Post Reply