Hey everyone, got a very tricky issue for a G-Limited SW20 Auto.
Have ECU code 61 (3S-G A241-E). Referred to the Workshop manual to show that its an issue with Speed Sensor No2.
Followed the first steps of troubleshooting - Tested the SP2 (Speed Sensor) & E1 (Ground) pins for continuity, and it beeped.
Tested on my working G-lim MR2 and mine did not beep.
Any ideas where to go from here? The workshop manual literally just says to Replace the Engine and ECU is continuity if present..
Cheers!
MR2 A/T ECU // Speed Sensor No.2 Issue?
Moderator: Moderators
Forum rules
This area is dedicated to technical discussions concerning SW20's. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
This area is dedicated to technical discussions concerning SW20's. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
-
emjaay
- Guest of the Club.
- Posts: 1
- Joined: Thu Oct 31, 2019 2:14 pm
- Stomping Ground: Taranaki
- Prime Mover: SW20
- First name: Matt