Evening everyone,
I've been lurking for the last couple of months, slowly building up the information needed to complete a v6 conversion on my N/a 1992 sw20 and am starting to collect the parts required.
However, I am finding it difficult to find a complete engine, loom and ecu bundle for a 3vz or 1mz with a manual ecu at any pickaparts or engine supplier.
If anyone has information for the best place to find 3vz or 1mz in the upper north island it would be much appreciated.
Cheers.
Best place to get engines with loom and ecu
Moderator: Moderators
Forum rules
This area is dedicated to technical discussions concerning SW20's. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
This area is dedicated to technical discussions concerning SW20's. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
-
RustyKettle
- Club Member - MR2OCNZ
- Posts: 6
- Joined: Wed May 22, 2019 7:29 pm
- Stomping Ground: Northland
- Prime Mover: SW20
- First name: Jared
-
GDII
- Forum Moderator - MR2OCNZ
- Posts: 5739
- Joined: Sun Jul 10, 2011 5:13 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Phill
Re: Best place to get engines with loom and ecu
Buy a whole car for cheap! Camry or similar.
1990 SW20 MR2 G-Limited (GEN4 3SGTE Installed)
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
-
Mr-Paulio
- Area Coordinator - MR2OCNZ
- Posts: 1284
- Joined: Sat Sep 06, 2014 6:48 am
- Stomping Ground: Auckland
- Prime Mover: AW11
- First name: Paul
Re: Best place to get engines with loom and ecu
What he said.
I also don't believe you need a manual ECU. V6 manuals are quite rare. Previous auto/manual swaps I've done you just bridge the park switch out so it starts and otherwise its fine. I haven't done this on a Camry however.
'89 AW11 V6 Turbo (350BHP & 380Ft/lbs!) 
'86 AW11 20V (Sold)
'91 SW20 Turbo "BlackRat" #RatRodStyle (Sold)
'91 SW20 Turbo (Sold)
South Auckland Area Coordinator
'86 AW11 20V (Sold)
'91 SW20 Turbo "BlackRat" #RatRodStyle (Sold)
'91 SW20 Turbo (Sold)
South Auckland Area Coordinator
-
ClanFever
- Executive Officer - MR2OCNZ
- Posts: 2197
- Joined: Tue Sep 11, 2012 11:25 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Olaf
- Contact:
Re: Best place to get engines with loom and ecu
Whole car is the way to go, or find someone who is parting one privately. A wrecker will love to sell you a long block with all the other bits separately
Ex-President & Wellington Area Coordinator & Lower North MR2 Leader
Current: 1992 Toyota MR2 G-Limited with Gen 4 3S-GTE + CT20B (APEXED), 2005 Toyota IST, 2008 Toyota Vanguard - 2GR!
Past: 1990 Toyota MR2 G-Limited, "Semi Parts Car" 1991 Toyota MR2 G-Limited, '91 G-Limited, '89 G-Limited, '91 NZ New MR2, '91 G-Limited, '91 GT (Parts Car), '99 Altezza 3SGE, '98 Altezza 1GFE, '88 Corolla, '96 Curren, '94 Ceres Corolla, '94 Levin, '90 Hiace Super Custom 4x4, '91 Mirage, '93 MX-6 J-Spec, '91 Familia, '91 Galant, '90 Navara, '96 Commodore, '94 Pajero, '89 Lancer, '93 Pajero, '92 Pajero, '89 Mirage, '92 Terrano, '87 Familia, '03 Colt, '91 Pajero, '91 Pajero, '97 Carib, '96 Carina, '02 Turbo Forester
Current: 1992 Toyota MR2 G-Limited with Gen 4 3S-GTE + CT20B (APEXED), 2005 Toyota IST, 2008 Toyota Vanguard - 2GR!
Past: 1990 Toyota MR2 G-Limited, "Semi Parts Car" 1991 Toyota MR2 G-Limited, '91 G-Limited, '89 G-Limited, '91 NZ New MR2, '91 G-Limited, '91 GT (Parts Car), '99 Altezza 3SGE, '98 Altezza 1GFE, '88 Corolla, '96 Curren, '94 Ceres Corolla, '94 Levin, '90 Hiace Super Custom 4x4, '91 Mirage, '93 MX-6 J-Spec, '91 Familia, '91 Galant, '90 Navara, '96 Commodore, '94 Pajero, '89 Lancer, '93 Pajero, '92 Pajero, '89 Mirage, '92 Terrano, '87 Familia, '03 Colt, '91 Pajero, '91 Pajero, '97 Carib, '96 Carina, '02 Turbo Forester
-
RustyKettle
- Club Member - MR2OCNZ
- Posts: 6
- Joined: Wed May 22, 2019 7:29 pm
- Stomping Ground: Northland
- Prime Mover: SW20
- First name: Jared
Re: Best place to get engines with loom and ecu
That is unbelievably helpful information, much easier to find autos. Cheers for that.
-
Mr-Paulio
- Area Coordinator - MR2OCNZ
- Posts: 1284
- Joined: Sat Sep 06, 2014 6:48 am
- Stomping Ground: Auckland
- Prime Mover: AW11
- First name: Paul
Re: Best place to get engines with loom and ecu
Exactly! I just hope that is the case with a Camry ECU, but it shouldn't be hard. (Perhaps do a bit further research) Usually the Engine ECU only controls the engine and the auto trans is a separate ECU.
Good luck!
Good luck!
'89 AW11 V6 Turbo (350BHP & 380Ft/lbs!)
'86 AW11 20V (Sold)
'91 SW20 Turbo "BlackRat" #RatRodStyle (Sold)
'91 SW20 Turbo (Sold)
South Auckland Area Coordinator
'86 AW11 20V (Sold)
'91 SW20 Turbo "BlackRat" #RatRodStyle (Sold)
'91 SW20 Turbo (Sold)
South Auckland Area Coordinator
-
Mr-Paulio
- Area Coordinator - MR2OCNZ
- Posts: 1284
- Joined: Sat Sep 06, 2014 6:48 am
- Stomping Ground: Auckland
- Prime Mover: AW11
- First name: Paul
Re: Best place to get engines with loom and ecu
Another option is an after market ECU. I had a mega squirt on my na 3VZ that put down 196whp. I believe they are stock 180 at the flywheel. So costs a bit more but some good gains. I also have the same ECU running a turbo version of that engine now. So it can be flexible for future mods.
But as per above, if you have the space and time/effort a parts car is a good option.
I bought a Camry with 180ks for $700 that had rust preventing a WOF. After removing what I wanted I sold the rest of the car for $400.
But as per above, if you have the space and time/effort a parts car is a good option.
I bought a Camry with 180ks for $700 that had rust preventing a WOF. After removing what I wanted I sold the rest of the car for $400.
'89 AW11 V6 Turbo (350BHP & 380Ft/lbs!)
'86 AW11 20V (Sold)
'91 SW20 Turbo "BlackRat" #RatRodStyle (Sold)
'91 SW20 Turbo (Sold)
South Auckland Area Coordinator
'86 AW11 20V (Sold)
'91 SW20 Turbo "BlackRat" #RatRodStyle (Sold)
'91 SW20 Turbo (Sold)
South Auckland Area Coordinator
-
Benckj
- Forum Moderator - MR2OCNZ
- Posts: 7149
- Joined: Thu Nov 24, 2005 12:44 pm
- Stomping Ground: Otago
- Prime Mover: More than one MR2
- First name: Jim
Re: Best place to get engines with loom and ecu
I agree with aftermarket EMS if you can swing it. There are so many plug and play options now for good prices. Certainly opens up future possibilities with any performance or even economy mods.
Jim Benck
90 rev 1 parts car
98 rev 5 GT- all the mods
90 rev 1 parts car
98 rev 5 GT- all the mods