Custom braided fuel line

[kyle mills-brown]

Hey all I am in need of some help finding a shop that can do me a custom braided fuel line from the fuel pump holder to the fuel filter would anyone know of any shops I could try? I have no idea where to start looking

[Crawls]

Have you looked at doing it yourself??

Scarles sell all the connectors and hoses. That's where I went to do mine.
There is a write up here https://midshiprunabout.org/mk2/fuel-li ... ded-lines/

I followed this and it was reasonably easy.

[GDII]

It seems his hardline on the tank is damaged and the join between the hose and hardline refuses to come off. It needs a hardline to AN fitting repair of which I believe needs speciality tools to do?

[Crawls]

I have seen someone actually removed the old line from the pump, and mounted a new AN fitting directly to the top of the fuel pump cover and ran a new line from there. I can't bloody remember where though

[Crawls]

viewtopic.php?f=27&t=15258&start=15
Here it is haha. Go down to middle of page for a photo

[GDII]

Ah yes, a bulkhead fitting completely replacing the high pressure line. How does that seal to the plate?

[Crawls]

I think it is a simple o-ring as the fuel line from pump connects directly to base of bulkhead fitting and goes from there...
Maybe..

[tw2]

I have my old fuel pump hanger if you want to start again with oem. Good condition. Otherwise racerX makes an expensive billet one.

https://racerxfabrication.com/mr2-celic ... ump-hanger

[Benckj]

I’ve run a new supply and return line to top of pump bulkhead using AN fittings and line from NZKW in AK. For an extra $10 they will install onto their braided line as this can be tricky. When I’m on my work PC I can post a link to a thread that shows what to do.

Link to hardline fitting that uses a brass grommet to seal onto fuel line.

https://nzkw.com/product/nzkw-hardline-fittings-female/

[GDII]

It seems Pirtek were able to create a new braided line using a hardline to AN fitting and a banjo fitting at the filter end.