Anyone have a idea which car from Toyota have a 5x114.3 hub with bearing can fit in to the MR-S? Because one of my friend had a 5x114.3 hubs fit in at his rear wheels ( not using adapter) but the front still use 4x100!
Thanks
Moksi
5x114.3 PCD for MR-S
Moderator: Moderators
Forum rules
This area is dedicated to technical discussions concerning ZZW30's a.k.a. MRS / Spyder. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
This area is dedicated to technical discussions concerning ZZW30's a.k.a. MRS / Spyder. Please try to spell correctly because this will help people find information later if they are using search functionality. If you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
-
Moksi
- Guest of the Club.
- Posts: 9
- Joined: Wed Nov 10, 2010 5:17 pm
- Stomping Ground: Auckland
- Prime Mover: ZZW30 (MRS / Spyder)
- First name: Joseph
-
Alsw20
- Club Member - MR2OCNZ
- Posts: 1748
- Joined: Mon Jun 28, 2010 1:56 pm
- Stomping Ground: Christchurch
- Prime Mover: SW20
- First name: Al
Re: 5x114.3 PCD for MR-S
The Celica 5x100 can be made to fit, but then it usually requires an adaptor to 5x114.3.
-
EssDub
- Guest of the Club.
- Posts: 3043
- Joined: Mon Oct 03, 2005 9:02 pm
- Stomping Ground: Outside of New Zealand
- Prime Mover: Looking for an MR2
- First name: Graham
Re: 5x114.3 PCD for MR-S
You can use Celica front hubs on the rear of a Spyder, but you will need to redrill the front hubs to suit 5x100 PCD. I've heard rumors of being able to use Celica rear hubs on the front, but they are slightly different in dimension, so don't fit the front carrier assembly quite right, without modification.