Progress on my aw11 rallycar
Moderator: Moderators
Forum rules
This section of the forum is a great resource if you're looking for ideas, and it's a cool way of obtaining technical information that may otherwise not have been posted. (Members can use the Search functionality at top right of the forum to speed up finding things) Please respect others' contributions and don't diss anyone - keep comments helpful, factual, positive and polite. One thread per vehicle or owner please - don't start lots of threads about just one car. And if you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
This section of the forum is a great resource if you're looking for ideas, and it's a cool way of obtaining technical information that may otherwise not have been posted. (Members can use the Search functionality at top right of the forum to speed up finding things) Please respect others' contributions and don't diss anyone - keep comments helpful, factual, positive and polite. One thread per vehicle or owner please - don't start lots of threads about just one car. And if you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
-
- Club Member - MR2OCNZ
- Posts: 57
- Joined: Thu Dec 01, 2011 8:25 pm
- Stomping Ground: Wellington
- Prime Mover: AW11
- First name: Brian
Re: Progress on my aw11 rallycar
Well things just aren"t progressing very well. Had no luck getting vvtior vavle lift working (yes checked puprle wire) have plugged it into a scanner and don"t have any faults so brought an apexi power fc ecu that had been setup on a 2zz-ge and now can"t get it to run without stopping. So it might be a while yet!
-
- Club Member - MR2OCNZ
- Posts: 57
- Joined: Thu Dec 01, 2011 8:25 pm
- Stomping Ground: Wellington
- Prime Mover: AW11
- First name: Brian
Re: Progress on my aw11 rallycar
Things are finally looking up! G4 storm link installed and all systems go!! Race technologies 2 dash on the way, escort grp4 bilstien inserts under way, 4pot willwoods and mounts here, new dash almost finished, new steering column in with steering quickener in so all go at the moment.
- *84vvt
- Life Member - MR2OCNZ
- Posts: 2557
- Joined: Sun Jun 06, 2004 11:44 am
- Stomping Ground: Wellington
- Prime Mover: AW11
- First name: Colin
Re: Progress on my aw11 rallycar
Nice
Whos going to do the tuning ?
Whos going to do the tuning ?
Boosted cars are like hot women.
A little edgy, every guy wants one,
some guys can't handle them,
and if you throw a little alcohol in them they'll rock your world.
A little edgy, every guy wants one,
some guys can't handle them,
and if you throw a little alcohol in them they'll rock your world.
-
- Club Member - MR2OCNZ
- Posts: 57
- Joined: Thu Dec 01, 2011 8:25 pm
- Stomping Ground: Wellington
- Prime Mover: AW11
- First name: Brian
Re: Progress on my aw11 rallycar
Roskilda in palmerston north. looks like I now have 8inchs rear wheel travel.
- flying_wedge
- Club Member - MR2OCNZ
- Posts: 1698
- Joined: Sat Aug 06, 2005 5:07 pm
- Stomping Ground: Christchurch
- Prime Mover: AW11
- First name: Mark
Re: Progress on my aw11 rallycar
Good news! Been for a drive with the engine performing as it should yet?
What power did you get it making on the G4?
What power did you get it making on the G4?
-
- Club Member - MR2OCNZ
- Posts: 57
- Joined: Thu Dec 01, 2011 8:25 pm
- Stomping Ground: Wellington
- Prime Mover: AW11
- First name: Brian
Re: Progress on my aw11 rallycar
No not ready for a drive yet, probably about 5 weeks away and then dyno.
-
- Club Member - MR2OCNZ
- Posts: 57
- Joined: Thu Dec 01, 2011 8:25 pm
- Stomping Ground: Wellington
- Prime Mover: AW11
- First name: Brian
Re: Progress on my aw11 rallycar
It"s been a while but I'm finally getting there, suspension is done and bumpsteer sorted.just getting the brake lines made then the 4pot wilwoods are ready to go on each corner. airbox is done just finishing the inlet tube to throttle body so hopefully dyno in a few weeks!
- *84vvt
- Life Member - MR2OCNZ
- Posts: 2557
- Joined: Sun Jun 06, 2004 11:44 am
- Stomping Ground: Wellington
- Prime Mover: AW11
- First name: Colin
Re: Progress on my aw11 rallycar
That's one serious looking filter you have there.
Boosted cars are like hot women.
A little edgy, every guy wants one,
some guys can't handle them,
and if you throw a little alcohol in them they'll rock your world.
A little edgy, every guy wants one,
some guys can't handle them,
and if you throw a little alcohol in them they'll rock your world.
- Ash Kelly Barr
- Club Member - MR2OCNZ
- Posts: 838
- Joined: Sun Dec 29, 2013 10:12 am
- Stomping Ground: Auckland
- Prime Mover: AW11
- First name: Ash
Re: Progress on my aw11 rallycar
This is pretty epic! I've been looking at box guards for my rear too.
Good call on the OEM panel filter
Good call on the OEM panel filter
Toyota motors:
Current - 89 AW11 factory manual SC
Sold - 74 Toyota Crown wagon (MS63), Holden 308, TH400 trans
Current - 89 AW11 factory manual SC
Sold - 74 Toyota Crown wagon (MS63), Holden 308, TH400 trans
-
- Club Member - MR2OCNZ
- Posts: 57
- Joined: Thu Dec 01, 2011 8:25 pm
- Stomping Ground: Wellington
- Prime Mover: AW11
- First name: Brian
Re: Progress on my aw11 rallycar
Yes bigger is best!you can never have to much air, it's a Nissan navara filter.
-
- Club Member - MR2OCNZ
- Posts: 57
- Joined: Thu Dec 01, 2011 8:25 pm
- Stomping Ground: Wellington
- Prime Mover: AW11
- First name: Brian
Re: Progress on my aw11 rallycar
...well it is finally certed!!! Also has a wof and rego next week.then off to wrc developments in napier to finish the tuning.
It's been 6 years since i last rallied it and are getting pretty excitted.
It's been 6 years since i last rallied it and are getting pretty excitted.
- Attachments
-
[The extension mp4 has been deactivated and can no longer be displayed.]
-
- Club Member - MR2OCNZ
- Posts: 57
- Joined: Thu Dec 01, 2011 8:25 pm
- Stomping Ground: Wellington
- Prime Mover: AW11
- First name: Brian
Re: Progress on my aw11 rallycar
mr2grpb wrote:At last i"ve got the 2zz where it belongs! just have to sort the wiring now (thanks Nick)and need to get a pressure plate. have installed my trd kitted aw 5 spd with a 2zz bellhousing, removed standard fuel pump from tank and got a wallbro external pump/filter. Also seen a certifier and no problem to cert with the fibreglass tilt backend.
- MylerMr2
- Club Member - MR2OCNZ
- Posts: 47
- Joined: Sat Mar 04, 2017 11:51 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Tony
Re: Progress on my aw11 rallycar
Was awesome to talk to you and see this build last weekend in fielding, such an awesome and unique build, would definitely love to see this thing in action one day.mr2grpb wrote:Screenshot_20190419-150729_Gallery.jpgmr2grpb wrote:At last i"ve got the 2zz where it belongs! just have to sort the wiring now (thanks Nick)and need to get a pressure plate. have installed my trd kitted aw 5 spd with a 2zz bellhousing, removed standard fuel pump from tank and got a wallbro external pump/filter. Also seen a certifier and no problem to cert with the fibreglass tilt backend.
1990 T-top SW20 Turbo Project/Track/Weekend Cruiser
2006 Lexus IS350 Daily
Follow My Instagram - @that_green_sw20
2006 Lexus IS350 Daily
Follow My Instagram - @that_green_sw20