Progress on my aw11 rallycar

Want a thread dedicated to your car?
Got a seriously pimped-out ride? Building an extreme performance MR2? Post here!

Moderator: Moderators

Forum rules
This section of the forum is a great resource if you're looking for ideas, and it's a cool way of obtaining technical information that may otherwise not have been posted. (Members can use the Search functionality at top right of the forum to speed up finding things) Please respect others' contributions and don't diss anyone - keep comments helpful, factual, positive and polite. One thread per vehicle or owner please - don't start lots of threads about just one car. And if you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
Post Reply
mr2grpb
Club Member - MR2OCNZ
Posts: 57
Joined: Thu Dec 01, 2011 8:25 pm
Stomping Ground: Wellington
Prime Mover: AW11
First name: Brian

Progress on my aw11 rallycar

Post by mr2grpb »

At last i"ve got the 2zz where it belongs! just have to sort the wiring now (thanks Nick)and need to get a pressure plate. have installed my trd kitted aw 5 spd with a 2zz bellhousing, removed standard fuel pump from tank and got a wallbro external pump/filter. Also seen a certifier and no problem to cert with the fibreglass tilt backend.
Attachments
2012-06-10 13.36.59.jpg
progress! at last.
progress! at last.
Top
User avatar
flying_wedge
Club Member - MR2OCNZ
Posts: 1696
Joined: Sat Aug 06, 2005 5:07 pm
Stomping Ground: Christchurch
Prime Mover: AW11
First name: Mark

Re: Progress on my aw11 rallycar

Post by flying_wedge »

Nice!
Nother 2zz in NZ :)
Headers look bit extreme, especially with the firewall chop. What they originally built for?
Image
Top
mr2grpb
Club Member - MR2OCNZ
Posts: 57
Joined: Thu Dec 01, 2011 8:25 pm
Stomping Ground: Wellington
Prime Mover: AW11
First name: Brian

Re: Progress on my aw11 rallycar

Post by mr2grpb »

I built them. what a job.
Top
mr2grpb
Club Member - MR2OCNZ
Posts: 57
Joined: Thu Dec 01, 2011 8:25 pm
Stomping Ground: Wellington
Prime Mover: AW11
First name: Brian

Re: Progress on my aw11 rallycar

Post by mr2grpb »

This is what the rear will look like when done.
Attachments
Photo0143.jpg
Top
mr2grpb
Club Member - MR2OCNZ
Posts: 57
Joined: Thu Dec 01, 2011 8:25 pm
Stomping Ground: Wellington
Prime Mover: AW11
First name: Brian

Re: Progress on my aw11 rallycar

Post by mr2grpb »

Photo0144.jpg
Top
mr2grpb
Club Member - MR2OCNZ
Posts: 57
Joined: Thu Dec 01, 2011 8:25 pm
Stomping Ground: Wellington
Prime Mover: AW11
First name: Brian

Re: Progress on my aw11 rallycar

Post by mr2grpb »

Here"s the full exhaust system.
2012-05-06 13.52.40.jpg
Attachments
2012-05-10 16.53.09.jpg
Top
mr2grpb
Club Member - MR2OCNZ
Posts: 57
Joined: Thu Dec 01, 2011 8:25 pm
Stomping Ground: Wellington
Prime Mover: AW11
First name: Brian

Re: Progress on my aw11 rallycar

Post by mr2grpb »

2012-05-10 16.53.48.jpg
Top
mr2grpb
Club Member - MR2OCNZ
Posts: 57
Joined: Thu Dec 01, 2011 8:25 pm
Stomping Ground: Wellington
Prime Mover: AW11
First name: Brian

Re: Progress on my aw11 rallycar

Post by mr2grpb »

2012-05-10 16.53.21.jpg
Top
User avatar
flying_wedge
Club Member - MR2OCNZ
Posts: 1696
Joined: Sat Aug 06, 2005 5:07 pm
Stomping Ground: Christchurch
Prime Mover: AW11
First name: Mark

Re: Progress on my aw11 rallycar

Post by flying_wedge »

Look pretty similar lengths for primaries and secondaries as the system nick built.
What you got left to complete to get it running?
Image
Top
User avatar
GDII
Forum Moderator - MR2OCNZ
Posts: 5739
Joined: Sun Jul 10, 2011 5:13 pm
Stomping Ground: Wellington
Prime Mover: SW20
First name: Phill

Re: Progress on my aw11 rallycar

Post by GDII »

That is a cool project. Good to see another AW11 turned into a rally car.

What will you do to get the structural stability back into the rear end after removing the boot panels?
Top
mr2grpb
Club Member - MR2OCNZ
Posts: 57
Joined: Thu Dec 01, 2011 8:25 pm
Stomping Ground: Wellington
Prime Mover: AW11
First name: Brian

Re: Progress on my aw11 rallycar

Post by mr2grpb »

flying_wedge wrote:Look pretty similar lengths for primaries and secondaries as the system nick built.
What you got left to complete to get it running?
Yes i got the lengths off Nick, so should do the trick. Just got hte wiring to sort and water plumbing,have wiring diagram also from Nick so hopefully not to much longer.
Top
mr2grpb
Club Member - MR2OCNZ
Posts: 57
Joined: Thu Dec 01, 2011 8:25 pm
Stomping Ground: Wellington
Prime Mover: AW11
First name: Brian

Re: Progress on my aw11 rallycar

Post by mr2grpb »

GDII wrote:That is a cool project. Good to see another AW11 turned into a rally car.

What will you do to get the structural stability back into the rear end after removing the boot panels?
Will look at doing a triangleated strut brace setup to work with the rollcage.Thanks
Top
User avatar
born disturbed
Club Member - MR2OCNZ
Posts: 284
Joined: Mon Feb 11, 2008 11:29 pm
Stomping Ground: Auckland
Prime Mover: AW11
First name: Jared

Re: Progress on my aw11 rallycar

Post by born disturbed »

Epic build!! I think I have found a new inspiration in AW design. Please keep us well updated :)
Top
mr2grpb
Club Member - MR2OCNZ
Posts: 57
Joined: Thu Dec 01, 2011 8:25 pm
Stomping Ground: Wellington
Prime Mover: AW11
First name: Brian

Re: Progress on my aw11 rallycar

Post by mr2grpb »

I have finally done an event! haven"t got the vvti working yet but still has 100kw at the wheels.
Attachments
IMG_7370[1].jpg
IMG_7370[1].jpg (268.65 KiB) Viewed 4637 times
IMG_7369a[1].jpg
IMG_7369a[1].jpg (36.27 KiB) Viewed 4637 times
IMG_7368a[1].jpg
IMG_7368a[1].jpg (37.38 KiB) Viewed 4637 times
Top
User avatar
*84vvt
Life Member - MR2OCNZ
Posts: 2557
Joined: Sun Jun 06, 2004 11:44 am
Stomping Ground: Wellington
Prime Mover: AW11
First name: Colin

Re: Progress on my aw11 rallycar

Post by *84vvt »

mr2grpb wrote:I have finally done an event! haven"t got the vvti working yet but still has 100kw at the wheels.
Nice
Which dyno did you have the power run on ?
you have 2 Kw more than me at the moment.
Then six speed is running very well but not made me any quicker around Manfeild
still only doing 1:32s.
Boosted cars are like hot women.
A little edgy, every guy wants one,
some guys can't handle them,
and if you throw a little alcohol in them they'll rock your world.

Image
Top
Post Reply

Return to “Rides”