troy's 90 sw20 and 89 s/c aw
Moderator: Moderators
Forum rules
This section of the forum is a great resource if you're looking for ideas, and it's a cool way of obtaining technical information that may otherwise not have been posted. (Members can use the Search functionality at top right of the forum to speed up finding things) Please respect others' contributions and don't diss anyone - keep comments helpful, factual, positive and polite. One thread per vehicle or owner please - don't start lots of threads about just one car. And if you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
This section of the forum is a great resource if you're looking for ideas, and it's a cool way of obtaining technical information that may otherwise not have been posted. (Members can use the Search functionality at top right of the forum to speed up finding things) Please respect others' contributions and don't diss anyone - keep comments helpful, factual, positive and polite. One thread per vehicle or owner please - don't start lots of threads about just one car. And if you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
- Troyhaima
- Club Member - MR2OCNZ
- Posts: 442
- Joined: Thu Feb 28, 2013 6:38 pm
- Stomping Ground: Christchurch
- Prime Mover: SW20
- First name: Troy
Re: troy's 91, 90 sw20 and 86, 86 s/c aw
just got a front strut brace to replace the stock one on my sw.
I have dyslexia so please excuse spelling.
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
- Troyhaima
- Club Member - MR2OCNZ
- Posts: 442
- Joined: Thu Feb 28, 2013 6:38 pm
- Stomping Ground: Christchurch
- Prime Mover: SW20
- First name: Troy
Re: troy's 91, 90 sw20 and 86, 86 s/c, 89 s/c aw
well just recently i brought another aw11 .
its a 1989 s/c aw11 fully stock. only problem is that it was broken into and stolen then recovered from previous owners before they sold it on to turners auctions.
so rear pasengers window is smashed, top of center consol is broken, both seat belts dont work, igintion is destroyed has to be started by a screwdriver and the head gasket is blown.
so a bit of work to do to get this up and running. least i have a spear 4agze here to replace other motor till i can re build it.
also this one is to replace my other s/c aw11. so will be taking all the good stuff off old aw11 and put it on to this one.
its a 1989 s/c aw11 fully stock. only problem is that it was broken into and stolen then recovered from previous owners before they sold it on to turners auctions.
so rear pasengers window is smashed, top of center consol is broken, both seat belts dont work, igintion is destroyed has to be started by a screwdriver and the head gasket is blown.
so a bit of work to do to get this up and running. least i have a spear 4agze here to replace other motor till i can re build it.
also this one is to replace my other s/c aw11. so will be taking all the good stuff off old aw11 and put it on to this one.
I have dyslexia so please excuse spelling.
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
- Malcolm
- Club Member - MR2OCNZ
- Posts: 638
- Joined: Mon May 24, 2010 8:24 pm
- Stomping Ground: Auckland
- Prime Mover: AW11
- First name: Malcolm
Re: troy's 91, 90 sw20 and 86, 86 s/c, 89 s/c aw
Similar story to mine when I first got it. For what it's worth, the AW11 ignition barrel housing is the same as Corollas from the same era (EE8* and AE8* etc).
- Troyhaima
- Club Member - MR2OCNZ
- Posts: 442
- Joined: Thu Feb 28, 2013 6:38 pm
- Stomping Ground: Christchurch
- Prime Mover: SW20
- First name: Troy
Re: troy's 91, 90 sw20 and 86, 86 s/c, 89 s/c aw
sweet thanks for that malcolm. ill keep any eye out for them.
I have dyslexia so please excuse spelling.
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
- Benckj
- Forum Moderator - MR2OCNZ
- Posts: 7148
- Joined: Thu Nov 24, 2005 12:44 pm
- Stomping Ground: Otago
- Prime Mover: More than one MR2
- First name: Jim
Re: troy's 91, 90 sw20 and 86, 86 s/c, 89 s/c aw
Looks like it might had been a good car prior to being nicked. Probably the biggest worry is the blown HG which will take some time + $$ to repair. Wonder what other mechanical faults will crop up once engine is pulled. Did you get the car for a reasonable price?
Jim Benck
90 rev 1 parts car
98 rev 5 GT- all the mods
90 rev 1 parts car
98 rev 5 GT- all the mods
- Troyhaima
- Club Member - MR2OCNZ
- Posts: 442
- Joined: Thu Feb 28, 2013 6:38 pm
- Stomping Ground: Christchurch
- Prime Mover: SW20
- First name: Troy
Re: troy's 91, 90 sw20 and 86, 86 s/c, 89 s/c aw
payed a little more than i wanted. $3800. iv got a spaire engine i was going to put in then replace head gasket some other time. all iv got left is to get exuast and gear cables and clutch lines off then be ready to drop the engine out.
I have dyslexia so please excuse spelling.
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
- Troyhaima
- Club Member - MR2OCNZ
- Posts: 442
- Joined: Thu Feb 28, 2013 6:38 pm
- Stomping Ground: Christchurch
- Prime Mover: SW20
- First name: Troy
Re: troy's 91, 90 sw20 and 86, 86 s/c, 89 s/c aw
just curious is this what i need for the igniton. or this only half of it
http://www.ebay.com/itm/NEW-IGNITION-SW ... V-&vxp=mtr
http://www.ebay.com/itm/NEW-IGNITION-SW ... V-&vxp=mtr
I have dyslexia so please excuse spelling.
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
- Malcolm
- Club Member - MR2OCNZ
- Posts: 638
- Joined: Mon May 24, 2010 8:24 pm
- Stomping Ground: Auckland
- Prime Mover: AW11
- First name: Malcolm
Re: troy's 91, 90 sw20 and 86, 86 s/c, 89 s/c aw
It depends how much is broken but if it's like mine then the whole steering lock housing will be broken off, and the replacement part is quite a large cast aluminium piece that goes over the steering column (you have to remove the steering wheel to take it off)
- MIKEP
- Area Coordinator - MR2OCNZ
- Posts: 1266
- Joined: Thu May 22, 2014 11:34 am
- Stomping Ground: Auckland
- Prime Mover: More than one MR2
- First name: Mike
Re: troy's 91, 90 sw20 and 86, 86 s/c, 89 s/c aw
Yup mine was the same when it got stolen the alloy housing was broken. I had to replace the whole thing.There are a couple of sheer bolts you need to get out too and they can be a pain sometimes too
86 AW11 S/C,
81 Porsche 924S
02 VW Golf GTI
Minisprint powered by 4AGE 73D
99 ZZW30 Spyder
04 VW Passat V5
04 Mercedes ML270Cdi
90 SW20 N/A
2022 Club President
Auckland AC-Shows,Motorsport
81 Porsche 924S
02 VW Golf GTI
Minisprint powered by 4AGE 73D
99 ZZW30 Spyder
04 VW Passat V5
04 Mercedes ML270Cdi
90 SW20 N/A
2022 Club President
Auckland AC-Shows,Motorsport
- Troyhaima
- Club Member - MR2OCNZ
- Posts: 442
- Joined: Thu Feb 28, 2013 6:38 pm
- Stomping Ground: Christchurch
- Prime Mover: SW20
- First name: Troy
Re: troy's 91, 90 sw20 and 86, 86 s/c, 89 s/c aw
yea that has been snaped off. all good ill look into getting all that off.
well last few days after work i have been stripping stuff off motor to get it ready to drop out of car. today managed to drop it out and swap everything off one motor to the other and get it back under the car read to lift back into car. now just waiting for the new water pipes to arive. the old ones just fell to bits when i touched them. plus found some holes that the old owner put duct tape over to cover the holes. while i wait for the pipes im going to start figuring out how to mount the water to air intercooler. planing on doing a trunk mount. as well as mount the sc14. dose any one know if you can use the over boost pulley from the sc12 on the sc14?
well last few days after work i have been stripping stuff off motor to get it ready to drop out of car. today managed to drop it out and swap everything off one motor to the other and get it back under the car read to lift back into car. now just waiting for the new water pipes to arive. the old ones just fell to bits when i touched them. plus found some holes that the old owner put duct tape over to cover the holes. while i wait for the pipes im going to start figuring out how to mount the water to air intercooler. planing on doing a trunk mount. as well as mount the sc14. dose any one know if you can use the over boost pulley from the sc12 on the sc14?
I have dyslexia so please excuse spelling.
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
- Troyhaima
- Club Member - MR2OCNZ
- Posts: 442
- Joined: Thu Feb 28, 2013 6:38 pm
- Stomping Ground: Christchurch
- Prime Mover: SW20
- First name: Troy
Re: troy's 91, 90 sw20 and 86, 86 s/c, 89 s/c aw
got engine back in today. only to find out i stuffed up bad. i didnt check the drivers engine mount for any difrences so now looking for an engine mount that suits hopfully. other wise going to have to drop the engine again.
new mount im looking for mount to suit it.
and heres the old set
new mount im looking for mount to suit it.
and heres the old set
I have dyslexia so please excuse spelling.
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
- Mr-Paulio
- Area Coordinator - MR2OCNZ
- Posts: 1284
- Joined: Sat Sep 06, 2014 6:48 am
- Stomping Ground: Auckland
- Prime Mover: AW11
- First name: Paul
Re: troy's 91, 90 sw20 and 86, 86 s/c, 89 s/c aw
I think I have a rhs mount at home. I'll check later tonight and post a picture. See if it's what you need.
'89 AW11 V6 Turbo (350BHP & 380Ft/lbs!)
'86 AW11 20V (Sold)
'91 SW20 Turbo "BlackRat" #RatRodStyle (Sold)
'91 SW20 Turbo (Sold)
South Auckland Area Coordinator
'86 AW11 20V (Sold)
'91 SW20 Turbo "BlackRat" #RatRodStyle (Sold)
'91 SW20 Turbo (Sold)
South Auckland Area Coordinator
- Troyhaima
- Club Member - MR2OCNZ
- Posts: 442
- Joined: Thu Feb 28, 2013 6:38 pm
- Stomping Ground: Christchurch
- Prime Mover: SW20
- First name: Troy
Re: troy's 91, 90 sw20 and 86, 86 s/c, 89 s/c aw
so got another engine mount from mr paulio. so engine is all in fully bolted back in and got the cvs back together .
also the new water pipes arived to replace all the ones in the engine bay. which had holes in them and repaired using ductape lol. also got the sc14 bolted on and most of the piping and the water to air intercoller.
also the new water pipes arived to replace all the ones in the engine bay. which had holes in them and repaired using ductape lol. also got the sc14 bolted on and most of the piping and the water to air intercoller.
I have dyslexia so please excuse spelling.
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
- Troyhaima
- Club Member - MR2OCNZ
- Posts: 442
- Joined: Thu Feb 28, 2013 6:38 pm
- Stomping Ground: Christchurch
- Prime Mover: SW20
- First name: Troy
Re: troy's 91, 90 sw20 and 86, 86 s/c, 89 s/c aw
so past few weeks finaly got car fully back together water to air intercooler and pump mounted now just need to get some fans for it. but will sort that out after i fix another 2 problems. managed to get it to start up and run quickly. since then the car has decided not to start since. still turns over just dosnt fire up. think its the alarm system playing up on it. the other problem is its now slowly leaking coolant off the join between the back of the water pipe and the water pump. oh well just goes to show when yea get another engine. take all the water pipes off and do new gaskets and seals. oh well hopefully leason learned. also managed to get a new pasengers rear window and ignition thanks to Mike.
I have dyslexia so please excuse spelling.
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
1991 sw20 mr2 non turbo new engine in with street cams also have done body work to it. sold
1990 sw20 mr2 na, street cams, link ecu
1986 aw11 mr2 blacktop 20v.
1986 s/c aw11 mr2
1986 nissan patrol (set up on some 35/10.5 tyires plus bull bars and other stuff for 4wding)
-
- Club Member - MR2OCNZ
- Posts: 1017
- Joined: Sat Jan 02, 2010 10:49 pm
- Stomping Ground: Otago
- Prime Mover: More than one MR2
- First name: mike
Re: troy's 91, 90 sw20 and 86, 86 s/c, 89 s/c aw
I have seat belts here too if you need some still and center console. Your supercharger is all cleaned up and sitting happily on my motor now
4AGZTE AW11 in progress, there is paint and I have lots of bits but still need allot more. Probably end up retired before this ever sees the road.
3sgte SW20 pain in the ass. Long gone
3SGE SW20 Rochelles car, actually road legal and working!!!!! LOL POS is always broken, wasting away in one garage.
2x AW and 1x SW in the process of being cut up for the crap man. Also long gone.
AW car I cant decide what to do with (Steeling parts off it while I decide) Deregd. Also long gone to scrap.
3sgte SW20 pain in the ass. Long gone
3SGE SW20 Rochelles car, actually road legal and working!!!!! LOL POS is always broken, wasting away in one garage.
2x AW and 1x SW in the process of being cut up for the crap man. Also long gone.
AW car I cant decide what to do with (Steeling parts off it while I decide) Deregd. Also long gone to scrap.