IC3YG4M3Rs MR2

[GDII]

More squirt, more bang, more smiles!

Is that a G4 plug in or wire in?

[IC3YG4M3R]

More squirt, more bang, more smiles!

Is that a G4 plug in or wire in?

Plug in I always wanted a power fc but this works

[IC3YG4M3R]

Welded on some -10 AN fittings to the rocker cover and gave it a nice respray

New 80mm throttle body for the custom intake manifold being made

Clear Cam Cover

MRP Oil relocation kit
MRP Thermostatic Oil Adapter
http://www.mrpltd.co.nz/product/oil-fil ... ion-combo/

ALOT of -10 AN Adapters from enzed (90 degrees, 45 degrees, straights), 8m of braided hose and an Aeromotive Fuel Pressure Reg as my Tomei one crapped out.

[chief1eye]

Now your talking my language! GO FAST BITS!
Tell me more about your custom intake manifold. I was looking at the Racer X centre feed manifold with must Mustang throttle body but they are pretty pricey. Like the look of that throttle body, where did you pick it up and what were the $$$$$. Cheers

[IC3YG4M3R]

Now your talking my language! GO FAST BITS!
Tell me more about your custom intake manifold. I was looking at the Racer X centre feed manifold with must Mustang throttle body but they are pretty pricey. Like the look of that throttle body, where did you pick it up and what were the $$$$$. Cheers

The throttle body was from NZKW, was about $170 ish. The intake will be a centre feed manifold straight out of the head into the boot where the intercooler will be. I'm getting it custom made by a friend of mine and he has an idea in his head of what he wants to do so ill have to wait till its complete to give you any more details Ill post up a picture when its done so you can check it out.