Page 7 of 10

Re: Zimmo's 1991 2GRFE project

Posted: Mon Mar 13, 2017 8:47 pm
by Benckj
Dam, hope you get well soon. Best of luck fighting this life changing experience.

Re: Zimmo's 1991 2GRFE project

Posted: Tue Mar 14, 2017 1:20 am
by Zimmo
Thanks Team, I'm very lucky as the only problem I have is they destroyed one of the two nerves for smell and taste and damaged the other, so cannot smell one side of my nose and food i can hardly taste. But small price to pay as they also said 95% chance I'll not walk again and I can walk and talk and type (i get very tired easy though). Sorry to hear about your cousin GD I'm sure she will beat it!!

They believe my tumour is benign but waiting on the biopsy results.

Anyways I'll go na for now I'm sure with the link G4+ I'll be able to squeeze 200rwkw out of it, will be plenty fast for now.

Re: Zimmo's 1991 2GRFE project

Posted: Tue Mar 14, 2017 7:39 am
by lasersooby
Feel for you mate, take it easy and God bless

Re: Zimmo's 1991 2GRFE project

Posted: Fri Apr 07, 2017 5:46 pm
by Zimmo
Engine is out again, the heads will be flow tested so I guess I'll find out about if they dont flow above 7500rpm like someone mentioned. All monkeywrench racing gear will be installed so hopefully in a month the engine will all be done.

Also from the bench flow test we will be able to enter that information into computer software along with the engine specs and turbo and predict the engine hp levels and be able to program the Link ecu to perform how I want it to (boost on early as possible and lots of low end torque). Simon from Delta Workshop and BNR Engineering are sorting this out (some of the best guys in the industry).

We are expecting the engine to make an easy 700hp then will turn it down to a dual boost of around 400 and 500hp respectively

Re: Zimmo's 1991 2GRFE project

Posted: Fri Apr 07, 2017 7:28 pm
by Benckj
You must be feeling better now. If you make those numbers that will be the best treatment available.

Re: Zimmo's 1991 2GRFE project

Posted: Sat Apr 08, 2017 7:56 am
by Zimmo
Thanks Ben, yes feeling lots better but still not perfect. Seeing my car does help lol.

Re: Zimmo's 1991 2GRFE project

Posted: Wed Apr 12, 2017 7:19 pm
by Zimmo
Engine is stripped, all new seals and gaskets ordered from Toyota (all in country) and all the kit on its way from Monkeywrenchracing USA.

Head is getting flow tested so will post results soon, the purpose of flow testing is so we can tune not for max numbers but for most usable power, I am wanting boost on early and smooth so I get the most torque down low due to the nature of the twisties in NZ. 94.25 pistons were selected so a small overbore is required.

So very soon team (as I understand it) we will have NZ's first 2GRFE built turbo. 700hp+ capable but running dual boost in safer levels, will dyno queen it while tuning to see what we get.
IMG_20170410_134721.jpg

Re: Zimmo's 1991 2GRFE project

Posted: Wed Apr 12, 2017 10:50 pm
by mickeyduck
Just caught up with this thread again and yeeouch but hey good job you're still with us Dylan!

I'm guessing you're back here in Auckland then? PNG on hold or you staying here do you think?

It's going to be awesome seeing your SW when it's done mate. Will be great for the shows if you're into it and it'll be very interesting on a run too. And on the track...

Just be sure to fit some serious cooling eh. And bloody good tyres. Potenza S001 work very well indeed.

Re: Zimmo's 1991 2GRFE project

Posted: Tue Apr 18, 2017 8:53 pm
by Zimmo
Thanks heaps and yes very lucky to be with you all still. I'm in Auckland but will be going back to PNG on the 19th of May... doubt the car will be ready by then though.

Plan is to let the shops who work on it take it to shows while I'm overseas as they seem to think the scene needs different cars like our sw20 and aw11's.

PWR water to air will be installed as well as the water meth.
I have Falken FK452's on it at the moment, if you are saying the Potenza S001's are better then I'll swap them as you are the expert!!
mickeyduck wrote:Just caught up with this thread again and yeeouch but hey good job you're still with us Dylan!

I'm guessing you're back here in Auckland then? PNG on hold or you staying here do you think?

It's going to be awesome seeing your SW when it's done mate. Will be great for the shows if you're into it and it'll be very interesting on a run too. And on the track...

Just be sure to fit some serious cooling eh. And bloody good tyres. Potenza S001 work very well indeed.

Re: Zimmo's 1991 2GRFE project

Posted: Mon Apr 24, 2017 2:44 pm
by Zimmo
All the gear has arrived from Toyota and Monkeywrench Racing will wait a month to recover financially lol and then continue.
IMG_20170424_133525.jpg
IMG_20170424_133716.jpg
IMG_20170424_143731.jpg

Re: Zimmo's 1991 2GRFE project

Posted: Wed Jul 26, 2017 2:17 pm
by Zimmo
Ok so not sure if I mentioned it however have Autospeed Engineering building my engine (www.autospeedengineering.co.nz) has almost finished my Engine build. The reason I picked Royce and his team is his history with successful race engines and with the potential power we will be running through it I didn't want to leave it to my own inexperienced hands or that or a standard mechanic. I will post photos when it is done, hopefully this will be by the end of next week.

Next step is BNR to make the intake and exhaust based of the flow information we did on the heads.

Re: Zimmo's 1991 2GRFE project

Posted: Wed Jul 26, 2017 5:15 pm
by Mr-Paulio
I hope to see this in the flesh one day! :D

Re: Zimmo's 1991 2GRFE project

Posted: Thu Jul 27, 2017 12:08 pm
by Zimmo
Bring along your 3VZ-FE AW11 when you do.

Hope it is finished soonish.

Re: Zimmo's 1991 2GRFE project

Posted: Thu Jul 27, 2017 1:45 pm
by Mr-Paulio
Zimmo wrote:Bring along your 3VZ-FE AW11 when you do.

Hope it is finished soonish.
Sounds like we should make a club run of it!
It's a project car, so will never truly be finished! :lol:
But should be road legal very soon!

Re: Zimmo's 1991 2GRFE project

Posted: Fri Sep 08, 2017 7:59 pm
by mknz
Zimmo wrote:Bring along your 3VZ-FE AW11 when you do.

Hope it is finished soonish.
hurry up :P I want to see this thing go