Pommy is back!!!
Moderator: Moderators
Forum rules
This section of the forum is a great resource if you're looking for ideas, and it's a cool way of obtaining technical information that may otherwise not have been posted. (Members can use the Search functionality at top right of the forum to speed up finding things) Please respect others' contributions and don't diss anyone - keep comments helpful, factual, positive and polite. One thread per vehicle or owner please - don't start lots of threads about just one car. And if you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
This section of the forum is a great resource if you're looking for ideas, and it's a cool way of obtaining technical information that may otherwise not have been posted. (Members can use the Search functionality at top right of the forum to speed up finding things) Please respect others' contributions and don't diss anyone - keep comments helpful, factual, positive and polite. One thread per vehicle or owner please - don't start lots of threads about just one car. And if you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
-
- Club Member - MR2OCNZ
- Posts: 172
- Joined: Mon Aug 18, 2014 8:57 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Chris
Pommies new project SWGT
Got some new rubber for the sw today.
235x40x17 rear
215x40x17 fronts
Nankang NS20
Had these on my last mr2 & M3 very good tyre. I wanted the new AS2 but they don't offer 215x40's in Nankang.
Now just waiting for my Radiator to turn up....
235x40x17 rear
215x40x17 fronts
Nankang NS20
Had these on my last mr2 & M3 very good tyre. I wanted the new AS2 but they don't offer 215x40's in Nankang.
Now just waiting for my Radiator to turn up....
- Jabeo
- Club Member - MR2OCNZ
- Posts: 377
- Joined: Thu Dec 21, 2017 2:33 pm
- Stomping Ground: Waikato
- Prime Mover: SW20
- First name: Jabeo
Re: Pommies new project SWGT
Where abouts did you buy these? Looking for new 215/40r17 for the fronts of my GT
1992 MR2 GT Turbo Complete with Traction control!
1997 N/A Honda Civic EK3
Follow me on Instagram https://www.instagram.com/jabeo_waho/
Im still learning a lot about cars so bear with me!
1997 N/A Honda Civic EK3
Follow me on Instagram https://www.instagram.com/jabeo_waho/
Im still learning a lot about cars so bear with me!
-
- Club Member - MR2OCNZ
- Posts: 172
- Joined: Mon Aug 18, 2014 8:57 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Chris
Re: Pommies new project SWGT
Mag & Turbo Wairau. Great service.
-
- Club Member - MR2OCNZ
- Posts: 172
- Joined: Mon Aug 18, 2014 8:57 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Chris
Re: Pommies new project SWGT
Got some new wheels for the beast!
Needs Lowering now....
Needs Lowering now....
- Attachments
-
- mr2wheels02.jpg (111.9 KiB) Viewed 2287 times
-
- mr2wheels01.jpg (111.36 KiB) Viewed 2287 times
-
- mr2wheels.jpg (111.9 KiB) Viewed 2287 times
-
- Club Member - MR2OCNZ
- Posts: 172
- Joined: Mon Aug 18, 2014 8:57 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Chris
- GDII
- Forum Moderator - MR2OCNZ
- Posts: 5739
- Joined: Sun Jul 10, 2011 5:13 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Phill
Re: Pommies new project SWGT
What wheels and specs are they? Looking good.
1990 SW20 MR2 G-Limited (GEN4 3SGTE Installed)
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
- Benckj
- Forum Moderator - MR2OCNZ
- Posts: 7149
- Joined: Thu Nov 24, 2005 12:44 pm
- Stomping Ground: Otago
- Prime Mover: More than one MR2
- First name: Jim
Re: Pommies new project SWGT
GPS tracker option??New Alarm fitted AVS S5 - With screamer & tilt sensor
Jim Benck
90 rev 1 parts car
98 rev 5 GT- all the mods
90 rev 1 parts car
98 rev 5 GT- all the mods
-
- Club Member - MR2OCNZ
- Posts: 172
- Joined: Mon Aug 18, 2014 8:57 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Chris
Re: Pommies new project SWGT
GDII wrote:What wheels and specs are they? Looking good.
That makes me feel better you have said that! As I still can't say I am totally sold on them....from the black.
However they are growing on me & once lowered might just look that bit better. I was trying to go for a more JDM look.
they are Avanti 2018 Osaka Lighweight 7.9's allround.
-
- Club Member - MR2OCNZ
- Posts: 172
- Joined: Mon Aug 18, 2014 8:57 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Chris
Re: Pommies new project SWGT
Yes he is coming back @ a later date to install a tracker.Benckj wrote:GPS tracker option??New Alarm fitted AVS S5 - With screamer & tilt sensor
-
- Club Member - MR2OCNZ
- Posts: 172
- Joined: Mon Aug 18, 2014 8:57 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Chris
Re: Pommy is back!!!
Installed new front slotted rotors & pads today. Ready for Clubfest!
Didn't have time to clean & paint the calipers, also purchased braided lines to go on....but ran out of time! I'm off to Aussie for work next week.
Didn't have time to clean & paint the calipers, also purchased braided lines to go on....but ran out of time! I'm off to Aussie for work next week.
-
- Club Member - MR2OCNZ
- Posts: 172
- Joined: Mon Aug 18, 2014 8:57 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Chris
Pommies swgt update
Today I installed some new springs. (Well some off trade me for now)
Also installed new anti roll bar links what a difference in size.
Went to change the intercooler piping silicone hose from blue to black.....and think I found my boost leak! A nice size hole in the pipe hhmmm. Could this be the start of another copper pipe intercooler build!!
After putting that aside for now, I thought I would check the shaft play in the turbo & I was very pleased to see it had zero play & blades look healthy.
I made a start on my leaking slave....but looks a mission so had a beer & will do some research.
Oh, I also decided I would run my black wheels again, I think it suits the red & black trim more.
Also installed new anti roll bar links what a difference in size.
Went to change the intercooler piping silicone hose from blue to black.....and think I found my boost leak! A nice size hole in the pipe hhmmm. Could this be the start of another copper pipe intercooler build!!
After putting that aside for now, I thought I would check the shaft play in the turbo & I was very pleased to see it had zero play & blades look healthy.
I made a start on my leaking slave....but looks a mission so had a beer & will do some research.
Oh, I also decided I would run my black wheels again, I think it suits the red & black trim more.
-
- Club Member - MR2OCNZ
- Posts: 172
- Joined: Mon Aug 18, 2014 8:57 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Chris
- GDII
- Forum Moderator - MR2OCNZ
- Posts: 5739
- Joined: Sun Jul 10, 2011 5:13 pm
- Stomping Ground: Wellington
- Prime Mover: SW20
- First name: Phill
Re: Pommy is back!!!
Both are factory fitment but the skinny ones are GEN1 stuff. You can see they are bent, quite common.
1990 SW20 MR2 G-Limited (GEN4 3SGTE Installed)
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
2000 AE111R Corolla Wagon NZ New Daily
1996 AE101R Corolla Sprint NZ New Selling Soon
1990 EP81 Starlet XL (Sold)
1990 EE90 Corolla XL (Sold)
Instagram https://www.instagram.com/sw20glimited/
-
- Club Member - MR2OCNZ
- Posts: 584
- Joined: Thu Dec 04, 2014 1:01 am
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: David
- Contact:
Re: Pommy is back!!!
It ended up in or around Mt. Roskill with a student last time I checked. It had a LOT more than a blown turbo. Main seals were toast and it was blowing white smoke so bad I wondered if it even had a head gasket to begin with. I walked away from it. Not sure if it changed hands since.chief1eye wrote:Awesome! Great to have you back again. Had a look at buying your old car but turbo was blown, guy was going to call me when fixed but never did. So not sure where it ended up?