1990 MR2 GT
Moderator: Moderators
Forum rules
This section of the forum is a great resource if you're looking for ideas, and it's a cool way of obtaining technical information that may otherwise not have been posted. (Members can use the Search functionality at top right of the forum to speed up finding things) Please respect others' contributions and don't diss anyone - keep comments helpful, factual, positive and polite. One thread per vehicle or owner please - don't start lots of threads about just one car. And if you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
This section of the forum is a great resource if you're looking for ideas, and it's a cool way of obtaining technical information that may otherwise not have been posted. (Members can use the Search functionality at top right of the forum to speed up finding things) Please respect others' contributions and don't diss anyone - keep comments helpful, factual, positive and polite. One thread per vehicle or owner please - don't start lots of threads about just one car. And if you need assistance with your car and want to host a spanner day, please use the appropriate section of the forum: http://mr2.org.nz/phpbb3/viewforum.php?f=35 Thank you.
- War1ock
- Guest of the Club.
- Posts: 351
- Joined: Sat Aug 06, 2011 8:31 pm
- Stomping Ground: Waikato
- Prime Mover: SW20
- First name: Mark
Re: 1990 MR2 GT
Farq!!!
-
- Guest of the Club.
- Posts: 1735
- Joined: Tue Jul 26, 2011 10:38 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Lee
Re: 1990 MR2 GT
There is a good chance your existing one is good to use. Strip it and inspect it, replace the seals if it all measures up okay and has no major scoring inside the pump. So long as there has been no solids go through the pump its probably okay to use once the seals are replaced... its the best lubricated part of the engine Make sure the relief valve is set correctly and sliding smoothly!
Gen 2 GT trackcar: Used and Abused, now getting some TLC.
CL7 Euro R, the fun begins at 6000 rpm
CL7 Euro R, the fun begins at 6000 rpm
- War1ock
- Guest of the Club.
- Posts: 351
- Joined: Sat Aug 06, 2011 8:31 pm
- Stomping Ground: Waikato
- Prime Mover: SW20
- First name: Mark
Re: 1990 MR2 GT
Cheers mate will give that a bash
- War1ock
- Guest of the Club.
- Posts: 351
- Joined: Sat Aug 06, 2011 8:31 pm
- Stomping Ground: Waikato
- Prime Mover: SW20
- First name: Mark
Re: 1990 MR2 GT
Still busy with this
Have gotten the block back. Have started the cleaning process over the past three months.
What I have done:
1.) Cleaned all grime off the Block and resprayed Ford Blue
2.) Cleaned and polished the head
3.) Cleaned and decarboned all valves and other parts.
4.) Cleaned and oiled the crank
5.) Cleaning all cam holders
There will be further updates to follow. There are some pictures but very few.
I wil have to take more it seems I have misplaced them and not uploaded them to photobucket.
Have gotten the block back. Have started the cleaning process over the past three months.
What I have done:
1.) Cleaned all grime off the Block and resprayed Ford Blue
2.) Cleaned and polished the head
3.) Cleaned and decarboned all valves and other parts.
4.) Cleaned and oiled the crank
5.) Cleaning all cam holders
There will be further updates to follow. There are some pictures but very few.
I wil have to take more it seems I have misplaced them and not uploaded them to photobucket.
- War1ock
- Guest of the Club.
- Posts: 351
- Joined: Sat Aug 06, 2011 8:31 pm
- Stomping Ground: Waikato
- Prime Mover: SW20
- First name: Mark
Re: 1990 MR2 GT
Parts ordered:
1 x set of JE 86.5mm forged pistons
1 x set arp head studs
1 x set standard ACL bearings Mains
1 x set standard ACL bearings big end
1 x cometic MLS gasket
Three weeks till parts arrive.
Cleaning:
All bolts cleaned. Pics taken before and after. Will upload some time.
1 x set of JE 86.5mm forged pistons
1 x set arp head studs
1 x set standard ACL bearings Mains
1 x set standard ACL bearings big end
1 x cometic MLS gasket
Three weeks till parts arrive.
Cleaning:
All bolts cleaned. Pics taken before and after. Will upload some time.
- War1ock
- Guest of the Club.
- Posts: 351
- Joined: Sat Aug 06, 2011 8:31 pm
- Stomping Ground: Waikato
- Prime Mover: SW20
- First name: Mark
- War1ock
- Guest of the Club.
- Posts: 351
- Joined: Sat Aug 06, 2011 8:31 pm
- Stomping Ground: Waikato
- Prime Mover: SW20
- First name: Mark
Re: 1990 MR2 GT
Cometic Gasket arrived
ARP Head studs have arrived.
Head has been put together.
WE are almost there.....
ARP Head studs have arrived.
Head has been put together.
WE are almost there.....
- War1ock
- Guest of the Club.
- Posts: 351
- Joined: Sat Aug 06, 2011 8:31 pm
- Stomping Ground: Waikato
- Prime Mover: SW20
- First name: Mark
Re: 1990 MR2 GT
Decided to rebuild the oil pump. New seals, orings and gaskets. Also everything clean and shiny.
- War1ock
- Guest of the Club.
- Posts: 351
- Joined: Sat Aug 06, 2011 8:31 pm
- Stomping Ground: Waikato
- Prime Mover: SW20
- First name: Mark
Re: 1990 MR2 GT
Hi All,
Here is the facebook Page I have created showing the rebuild:
https://www.facebook.com/pages/Warlocks ... tab=public
I will update this a little later. SOOOO Super excited about this.
Here is the facebook Page I have created showing the rebuild:
https://www.facebook.com/pages/Warlocks ... tab=public
I will update this a little later. SOOOO Super excited about this.
- War1ock
- Guest of the Club.
- Posts: 351
- Joined: Sat Aug 06, 2011 8:31 pm
- Stomping Ground: Waikato
- Prime Mover: SW20
- First name: Mark
- War1ock
- Guest of the Club.
- Posts: 351
- Joined: Sat Aug 06, 2011 8:31 pm
- Stomping Ground: Waikato
- Prime Mover: SW20
- First name: Mark
Re: 1990 MR2 GT
An update after such a long time.
The engine is ready to go back into the body. This will take place tomorrow.
Any one interested in donating some gearbox oil, a battery and some coolant
These are the last things I need to get her back up and running. Let's hope she lasts now
The engine is ready to go back into the body. This will take place tomorrow.
Any one interested in donating some gearbox oil, a battery and some coolant
These are the last things I need to get her back up and running. Let's hope she lasts now
- War1ock
- Guest of the Club.
- Posts: 351
- Joined: Sat Aug 06, 2011 8:31 pm
- Stomping Ground: Waikato
- Prime Mover: SW20
- First name: Mark
Re: 1990 MR2 GT
After almost 6 years I have finally just started adding fluids to the car.
I am impressed that I have not given up on this.
Bled the Clutch, new oil, gear oil, filters, battery.
Just need to finish up the electrics.
SOOOOOOOOOooooOOOOO excited.
I am impressed that I have not given up on this.
Bled the Clutch, new oil, gear oil, filters, battery.
Just need to finish up the electrics.
SOOOOOOOOOooooOOOOO excited.
- War1ock
- Guest of the Club.
- Posts: 351
- Joined: Sat Aug 06, 2011 8:31 pm
- Stomping Ground: Waikato
- Prime Mover: SW20
- First name: Mark
Re: 1990 MR2 GT
Hi all, I am not sure if I can place a video on here but if not please check my most exciting news on my facebook page "https://www.facebook.com/WarlocksGTRebuild/" EVER!!!
-
- Guest of the Club.
- Posts: 72
- Joined: Thu Jan 10, 2019 5:25 pm
- Stomping Ground: Auckland
- Prime Mover: SW20
- First name: Allan
- Contact:
Re: 1990 MR2 GT
good on you for sticking with it. love that colour BTW.
- War1ock
- Guest of the Club.
- Posts: 351
- Joined: Sat Aug 06, 2011 8:31 pm
- Stomping Ground: Waikato
- Prime Mover: SW20
- First name: Mark
Re: 1990 MR2 GT
Thanks mate, am still going,however in a saving mode right now
Need a new compressor to paint the car, current one is to small
Need a new compressor to paint the car, current one is to small